To Next PageTo Next PageWhy are the headlights not working on my Husqvarna Lawn Mower?
If the headlights on your Husqvarna Lawn Mower are not working, check the following: * Ensure the switch is turned “ON”. * Replace any burned-out bulbs or lamps. * Check or replace the light switch if it's faulty. * Inspect the wiring and connections for looseness or damage. * Replace the fuse if it is blown.
What causes loss of drive in my Husqvarna GT48DXLS Lawn Mower?
Loss of drive in your Husqvarna Lawn Mower can occur due to: * The freewheel control being in the “disengaged” position. Place it in the “engaged” position. * Debris on the steering plate (if equipped). * A worn, damaged, or broken motion drive belt. Replace the motion drive belt. * Air trapped in the transmission during shipment or servicing. Purge the transmission. * Missing axle key. Install the axle key at the rear wheel.
General| Engine Displacement | 725 cc |
|---|---|
| Cylinders | 2 |
| Cutting Width | 48 inches |
| Transmission Type | Hydrostatic |
| Transmission Manufacturer | Hydro-Gear |
| Deck Material | Steel |
| Blades | 3 |
| Fuel Capacity | 3.5 gallons |
| Cutting Height Range | 1.5 - 4 inches |
| Turning Radius | 16 inches |
| Tire Size (Rear) | 23x9.5x12 |
| Tire Size (Front) | 16x6.5x8 |
Focuses on preventing injury to children.
Outlines fundamental safety rules for operation.
Emphasizes caution and procedures for operating on slopes.
Covers towing safety and safe gasoline handling.
Tools, unpacking, battery, seat, and pre-skid steps.
Rolling off skid, tire pressure, deck, belts, and brake checks.
Explains symbols, safety alerts, and identifies controls.
Identifies and explains the tractor's controls.
Covers parking brake, stopping, throttle, and choke usage.
Covers forward/backward, cruise control, and differential lock.
Covers mower engagement, cutting height, gauge wheels, ROS, and slope operation.
Covers transport, battery indicators, oil level, and fueling.
Covers fuel cautions, reserve valve, and starting procedures.
Covers transmission purging and mowing best practices.
Covers the schedule, general advice, and pre-use checks.
Covers brakes, tires, and safety systems (OPS/ROS).
Covers V-belts, transaxle, and engine oil/filter.
Covers air filter, cooling, fuel filter, and general cleaning.
Procedure for using the deck washout port.
Procedures for deck and anti-sway bar.
Covers connecting mower deck components.
Covers side-to-side and front-to-back leveling.
Covers brake checks and mower drive belt.
Covers motion drive belt and wheel removal.
Covers starting with weak battery and replacement.
Covers headlights, fuse, hood, throttle, choke, transmission.
Covers tractor cleaning, belts, lubrication, fasteners, and paint.
Covers battery, fuel system, engine oil, and cylinder preparation.
Covers starting, power loss, and engine not turning over.
Covers vibration, clicking, and specific start issues.
Covers cut quality, blades, discharge, headlights, battery charging.
Covers loss of drive, safety systems, backfiring, engine dying in reverse.
