English-58
LUBRICATION
12. Brake Arms
Remove one rear wheel at a time (four lug
nuts).
Lubricate with a grease gun, one zerk for
each brake arm, until the grease is forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
13. Belt Adjuster, Hydraulic Pumps
Lubricate using a grease gun, one zerk, until
the grease squeezes out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains
a good quality.
8011-579
Lubricating brake arms
IMPORTANT INFORMATION
Use minimal lubrication and remove excess
lubricant so that is does not come into
contact with the brake band.
8011-575
Lubricating the belt adjuster
IMPORTANT INFORMATION
Use minimal lubrication and remove excess
lubricant so that is does not come into
contact with belts or belt pulley drive
surfaces.
To Next Page
Loading...
