What to do if my Husqvarna Lawn Mower flashes blue?
If your Husqvarna Lawn Mower is flashing blue, it indicates a problem with the boundary wire connection or damage. First, ensure the boundary wire is securely connected to the charging station. If the issue persists, inspect the boundary wire for any damage and replace any damaged sections with new wire.
Why is my Husqvarna AUTOMOWER 310 MARK II Lawn Mower showing a constant red light?
A constant red light on your Husqvarna Lawn Mower indicates an error in the circuit board or an incorrect power supply in the charging station. The error must be corrected by an authorized service technician. Speak to your local Husqvarna representative.
Why is my Husqvarna AUTOMOWER 310 MARK II Lawn Mower flashing red?
A flashing red light on your Husqvarna Lawn Mower indicates interference in the antenna of the charging station. Speak to your local Husqvarna representative.
General| Cutting width | 22 cm |
|---|---|
| Cutting height, min-max | 20-50 mm |
| Battery type | Li-ion |
| Typical charging time | 60 min |
| Typical mow time on one charge | 70 min |
| Sound level perceived | 59 dB(A) |
| Maximum slope performance inside installation | 40% |
| Working area capacity | 1000 m² |
| Cutting system | 3 pivoting razor blades |
| Weight | 9.4 kg |
| Battery voltage | 18 V |
| Battery capacity | 2.1 Ah |
| Maximum area capacity | 1000 m² |
| Noise level | 59 dB(A) |
| Weather resistance | Yes |
| Security features | PIN code, alarm |
| Connectivity | Bluetooth |
| Maximum slope | 25% (14°) |
Illustrated guide to the components and parts of the product.
Essential safety guidelines for operating and handling the product.
Key safety rules for operating the robotic lawn mower.
Important safety information regarding the product's battery.
Instructions on the safe procedure for lifting and moving the product.
Procedure for starting the product, including selecting operating modes.
Procedure for safely replacing worn or damaged blades.
List of fault messages, their causes, and recommended actions.
Guide to identifying and resolving problems based on observed symptoms.
Procedure for locating and repairing breaks in the boundary wire.
Specifications and technical details for different product models.
Details of the product warranty, coverage, and exclusions.
To Next Page
