Husqvarna AUTOMOWER 310 MARK II User Manual

1.9 Display
The display on the product shows information and
settings of the product.
To access the display, push the STOP button.
1.10 Keypad
Use the keypad on the product to move around in the
menu structure. To get access to the keypad, push the
STOP button.
• Use the ON/OFF button (A) to set the product
to ON or OFF. The LED indicator on the keypad
shows if the product is ON or OFF. Refer to
To use
the ON/OFF button on page 31 .
• Use the START button (B) to start the operation of
the product.
• Use the BACK button (C) to move up in the menu
lists.
• Use the arrow buttons (D) to move around in the
menu.
• Use the OK button (E) to do selections.
• Use the MENU button (F) to go to the main menu.
• Use the PARK button (G) to send the product to
the charging station.
• Use the number buttons (H) to enter digits.
A
B
F
G
C E
D
H
1462 - 007 - 14.03.2022 Introduction - 9

Husqvarna AUTOMOWER 310 MARK II Specifications

General

Cutting width	22 cm
Cutting height, min-max	20-50 mm
Battery type	Li-ion
Typical charging time	60 min
Typical mow time on one charge	70 min
Sound level perceived	59 dB(A)
Maximum slope performance inside installation	40%
Working area capacity	1000 m²
Cutting system	3 pivoting razor blades
Weight	9.4 kg
Battery voltage	18 V
Battery capacity	2.1 Ah
Maximum area capacity	1000 m²
Noise level	59 dB(A)
Weather resistance	Yes
Security features	PIN code, alarm
Connectivity	Bluetooth
Maximum slope	25% (14°)