Husqvarna AUTOMOWER 310 MARK II User Manual

2.7 How to lift and move the product
WARNING: The product must be
switched off before lifting it. The product
is disabled when the indicator lamp on the
keypad is not lit.
CAUTION: Do not lift the product when
it is parked in the charging station. It can
damage the charging station and/or the
product. Push STOP and pull the product
out of the charging station before lifting it.
To safely move from or within the work area:
1. Push the STOP button to stop the product.
2. Push the ON/OFF button for 3 seconds and make
sure the product is switched off. Check that the
indicator lamp on the keypad is not lit. This means
that the product is disabled. Refer to
To use the
ON/OFF button on page 31
.
3. Carry the product by the handle with the blade disc
away from the body.
12
- Safety 1462 - 007 - 14.03.2022

Husqvarna AUTOMOWER 310 MARK II Specifications

General

Cutting width	22 cm
Cutting height, min-max	20-50 mm
Battery type	Li-ion
Typical charging time	60 min
Typical mow time on one charge	70 min
Sound level perceived	59 dB(A)
Maximum slope performance inside installation	40%
Working area capacity	1000 m²
Cutting system	3 pivoting razor blades
Weight	9.4 kg
Battery voltage	18 V
Battery capacity	2.1 Ah
Maximum area capacity	1000 m²
Noise level	59 dB(A)
Weather resistance	Yes
Security features	PIN code, alarm
Connectivity	Bluetooth
Maximum slope	25% (14°)