English-59
LUBRICATION
6. Front Wheel Bearings
Lubricate with a grease gun, one zerk for
each set of wheel bearings, until the grease is
forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
7. Deck belt pulleys
Lubricate with a grease gun two strokes.
8. Mower Deck Height Adjuster
Lubricate using a grease gun, one zerk,
until the grease squeezes out.
Lubricate the lever latch run in the lever.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
8011-573
Lubricating the front wheels
8011-461
Deck belt pulleys
8011-456
Lubricating the cutting height adjuster
To Next Page
Loading...
