English-62
LUBRICATION
14. Changing the Oil Filter
1. Drain the engine oil in accordance with
the work description under the heading
Engine Oil/Change Engine Oil.
2. Remove the oil filter. If necessary, use a
filter remover.
3. Wipe new, clean engine oil onto the seal
for the new filter.
4. Mount the filter by hand with + 3/4 turn.
5. Run the engine warm, then check that
there are no leaks around the oil filter
seal.
6. Check the oil level in the engine, fill to
proper level if necessary. The oil filter
holds 0.2 qt (0.2 liters) of oil.
8011-570
Changing the oil filter Kawasaki
8011-745
Changing the oil filter Kohler
To Next Page
Loading...
