Need help?Do you have a question about the Husqvarna K1250 ACTIVE and is the answer not in the manual?
Explains symbols found directly on the power cutter machine.
Explains symbols used within the operator's manual itself.
Details essential protective gear for safe operation of the power cutter.
Describes the safety features integrated into the power cutter itself.
Explains the anti-vibration system designed for user comfort.
Details the function and usage of the engine stop switch.
Fundamental safety measures for operating the power cutter.
Specific safety advice for the cutting operation.
Information on water cooling, blade sharpening, and vibration prevention.
Steps to avoid kickback during cutting operations.
Explains and advises on avoiding blade pull-in and pinching.
Procedures for drying the blade and checking drive shaft speed.
Instructions for proper care and storage of the power cutter.
Overview of abrasive and diamond cutting blades.
Details on abrasive blades, materials, and applications.
Information on diamond blades, materials, and usage.
Details on fitting blades, including centre hole, bushes, and pads.
Instructions for checking and adjusting the blade guard.
Identifies and labels key parts of the power cutter.
Step-by-step guide to attaching the cutting head.
Instructions for securely mounting the cutting blade.
Guidance on fitting and adjusting the blade guard.
Safety measures and procedures for refuelling the power cutter.
Guidelines for mixing petrol and two-stroke oil ratios.
Procedure for starting the engine when cold.
Procedure for starting the engine when warm.
How to safely turn off the engine.
Instructions for adjusting the tension of the drive belt.
Steps for replacing the drive belt.
Explains carburettor function and idle speed adjustment.
Information on the fixed H-jet and troubleshooting.
Guidance on adjusting the low-speed needle and its effects.
Instructions for replacing the fuel filter.
Procedures for cleaning and maintaining the air filter system.
Steps for replacing a worn or broken starter cord.
Guide to replacing the recoil spring.
Instructions for correctly fitting the starter unit.
Advice on checking, cleaning, and replacing the spark plug.
How to clean the cooling system to prevent overheating.
Importance of checking the muffler for damage or blockage.
List of checks to perform daily.
List of checks to perform weekly.
List of checks to perform monthly.
Key engine details like volume, bore, stroke, and speed.
Details on fuel tank capacity and carburettor type.
Measured sound and vibration levels according to standards.
Specifications for cutting blades and gear ratios.
Statement of compliance with EU directives.
To Next Page
General
