Need help?Do you have a question about the Husqvarna K950 and is the answer not in the manual?
Explains various safety and operational symbols used in the manual.
Identifies and labels the main parts of the power cutter with corresponding numbers.
Outlines essential checks and procedures before operating the power cutter for the first time.
Details the mandatory personal protective equipment (PPE) required for safe operation.
Describes the purpose and maintenance of the machine's safety features.
Explains the function of the throttle trigger lock to prevent accidental acceleration.
Details the muffler's role in noise reduction and exhaust direction, with safety warnings.
Emphasizes the importance of the blade guard and its correct fitting for safety.
Provides instructions for inspecting and maintaining the machine's safety features.
Instructions on checking the vibration damping units for cracks and secure attachment.
Instructions on testing the stop switch for proper engine shutdown function.
Guidelines for checking the blade guard's condition and secure fitting.
Provides essential safety rules for operating the power cutter, including kickback risks.
Guidelines for safely transporting and storing the power cutter and its blades.
Crucial safety warnings and procedures for handling fuel, refueling, and storage.
Provides basic safety directions and rules for operating the power cutter effectively.
Safety guidelines and techniques for cutting operations, including kickback avoidance.
Explains the causes of kickback and provides essential techniques to prevent it.
Defines kickback and identifies the kickback zone on the cutting blade.
Discusses blade vibration issues, causes, and solutions like adjusting feed pressure.
Explains how cuts can pinch the blade, causing jamming and sudden jerks.
General information about cutting blades, including safety warnings and types.
Details abrasive discs, their composition, performance factors, and usage.
Safety precautions and operational advice for diamond blades used with water cooling.
Information on diamond blades designed for dry cutting, including cooling methods.
Explains the construction, benefits, and usage of diamond blades.
Step-by-step instructions for assembling the cutting head, including belt and guard fitting.
Details the correct procedure for mounting the cutting blade onto the machine.
Instructions on adjusting and ensuring the blade guard is correctly fitted for safety.
Information on the types of fuel and oil required, and the correct mixing ratio for the engine.
Safety precautions and procedures to follow during the refueling process.
Detailed instructions on how to start the power cutter, including cold and warm engine procedures.
Specific steps for starting the engine when it is cold, including choke usage.
Procedure for starting the engine when it is already warm, without using the choke.
Instructions on how to safely stop the engine using the stop switch.
Steps for adjusting the tension of the drive belt to ensure proper operation.
Procedure for removing and installing a new drive belt.
Notes on maintenance related to the belt pulley and clutch assembly.
Information on the carburettor's function, adjustment, and potential issues.
Guidance on adjusting the engine's idle speed for optimal performance.
Instructions on locating, maintaining, and replacing the fuel filter.
Details on cleaning and replacing the air filter to prevent engine problems.
General information and warnings related to the starter mechanism.
Step-by-step guide for replacing the starter cord.
Procedure for correctly tensioning the recoil spring.
Instructions on how to replace a damaged recoil spring.
Steps for correctly installing the starter assembly onto the engine.
Information on spark plug maintenance, cleaning, gap adjustment, and replacement.
Explains the cooling system components and how to clean them to prevent overheating.
Information about the muffler's function and warnings related to its heat and exhaust.
Provides an overview of daily, weekly, and monthly maintenance tasks.
Lists essential checks to be performed daily for optimal machine performance.
Outlines the maintenance tasks that should be completed on a weekly basis.
Details the maintenance checks and cleaning required on a monthly schedule.
Technical specifications for the engine, including displacement, bore, stroke, and speed.
Details on the carburettor and fuel tank capacity.
Specifications for the weight of the power cutter with and without cutting blade.
Data on sound power levels and noise emissions according to EC directives.
Measurement of vibration levels for front and rear handles as per ISO standards.
Technical data for cutting blades, including speed and output shaft RPM.
States that the declaration of conformity is specific to European market requirements.
Company declaration regarding compliance with EU directives for the power cutter.
To Next Page
General