To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna K 1260 and is the answer not in the manual?
General| Engine Power | 5.8 kW |
|---|---|
| Weight | 13.7 kg |
| Blade Diameter | 260 mm |
| Fuel Tank Volume | 0.97 l |
| Engine type | 2-stroke |
| Power output | 5.8 kW |
| Sound pressure level | 101 dB(A) |
| Cutting Depth | 125 mm |
Defines the meaning and severity of Warning, Caution, and Notice levels used in the manual.
Instructions for checking the blade guard for damage and correct fitment.
Explains the vibration damping system and how to inspect it for damage.
Lists and describes essential personal protective equipment for safe operation.
Core safety rules, responsible operation, and exercising common sense.
Focuses on maintaining a safe working environment and avoiding hazards.
Explains the severe risks of kickback and the importance of understanding its causes.
Details pinch, reactive, and climbing kickback, and how to prevent them.
Essential safety checks and preparations required before starting the engine.
Step-by-step guide for starting the power cutter, including choke and starter use.
Instructions on how to safely stop the engine and precautions for blade coasting.
Specific tasks listed for daily, weekly, and monthly maintenance inspections.
Instructions for checking drive belt tension, adjusting, and replacing it.
Guidance on adjusting low speed jet and idle speed for optimal engine performance.
Instructions for replacing worn starter cords and recoil springs safely.
Warns about silica dust from cutting, potential respiratory diseases, and cancer risks.
