Husqvarna LT151 User Manual

Instruction manual
Please read these instructions care-
ful ly and make sure you understand
them before using this machine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorg-
fältig durch und vergewissern Sie sich,
daß Sie diese verstehen, bevor Sie die
Maschine in Betrieb nehmen.
Manuel d’instructions
Merci de lire trés attentivement le man-
uel d'instructions. Assurez-vous d'avoir
tout compris avant d'utiliser ce tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y com-
prenda estas intrucciones antes de
usar esta maquina.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en
zorg dat u ze begrijpt voordat u deze
ma chine gebruikt.
LT151
03002
532 43 79-76 Rev. 1

Husqvarna LT151 Specifications

General

Engine Power	15 HP
Engine Manufacturer	Briggs & Stratton
Engine Type	4-Cycle
Engine Cylinders	1
Transmission Type	Hydrostatic
Number of Blades	2
Blade Engagement	Manual
Deck Material	Steel
Cutting Height	1.5-4 inches
Front Tire Size	15 x 6-6

Summary

1. Safety Rules and Procedures

Operator Training

Pre-Operation Preparation

Safe Operation Practices

2. Assembly

Battery Installation

Battery Installation Safety Warnings

Important safety precautions during battery installation.

3. Functional Description

4. Before Starting Procedures

Fueling Procedures

Safe procedures for filling the fuel tank.

Checking Oil Level

How to check and fill the engine oil level.

5. Driving Operations

Engine Starting Procedure

Driving Safety Features and Tips

Operator Presence Safety Switch

Information on the safety switch that stops the engine if the operator leaves the seat.

Reverse Operation System (ROS)

How to use the Reverse Operation System for safe backward movement.

Cutting Tips and Driving on Slopes

Switching Off the Engine

6. Maintenance and Adjustment

Maintenance Safety Precautions

Essential safety measures before performing maintenance.

Routine Maintenance Tasks

Routine Maintenance Tasks

Pinch Point Safety

Warnings about hazardous pinch points during maintenance.

General Maintenance and Cleaning

General Maintenance Checks

Safety Precautions for Maintenance

Warnings about hazardous pinch points during maintenance.

Changing Engine Oil

Operator Presence and Reverse Operation System (ROS)

Checking Operator Presence System

How to verify the proper function of the operator presence system.

Checking Reverse Operation System (ROS)

How to verify the correct operation of the ROS.

ROS System Operation Checks

ROS System Operation Checks

Procedures for checking the operator presence and reverse operation systems.

Mower Blades

Blade Sharpening and Replacement

Brake System Check

Deck Washout Port Usage

Deck Washout Port Safety Warnings

Warnings about potential hazards when using the washout port.

7. Troubleshooting

8. Storage and Seasonal Procedures

Storage Procedures

Steps for storing the tractor after the mowing season.