To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna LT152 and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Transmission Type | Hydrostatic |
| Cutting Height, min | 1.5 inches |
| Cutting Height, max | 4 inches |
| Blade Engagement | Manual |
| Tire Size, front | 15x6-6 |
| Tire Size, rear | 18x8.5-8 |
| Engine Type | Single-cylinder, 4-stroke |
Understand instructions before using the machine.
Learn controls and gain experience before operation.
Learn controls, understand safety rules, and prepare the machine.
Safety precautions and preparation steps in French.
Operator instruction and preparation guidelines in Spanish.
User training and preparation for safe operation in Italian.
Operator training and preparation for safe use in Dutch.
Explains symbols found on the machine and in the literature.
Steps to mount and adjust the steering wheel.
Instructions for installing and adjusting the operator's seat.
Procedures for installing and charging the battery.
Identifies the location and function of various controls.
Explains the operation of the light switch and throttle/choke control.
Describes the function of the clutch and brake pedal.
Explains how to use the gear shift lever and its positions.
Details on engaging/disengaging the cutting unit and its height adjustment.
Explains the different positions of the ignition switch.
Instructions on how to engage and disengage the parking brake.
Procedures for filling fuel and checking engine oil levels.
Instructions for checking and maintaining proper tire pressure.
Steps for safely starting the engine.
Procedures for operating the engine when cold or warm.
How to handle the ignition key once the engine has started.
Explanation of the operator presence safety system.
How to use the reverse operation system safely.
Advice for optimal lawn cutting results.
Safety precautions for operating on slopes.
Procedures for safely shutting down the engine.
Safety steps to take before performing maintenance.
Instructions for accessing the engine and connecting lights.
Routine checks, cleaning procedures, and general upkeep.
Steps for draining and refilling engine oil.
Maintenance intervals and a record-keeping log.
Detailed maintenance schedule in French and Spanish.
Detailed maintenance schedule in Italian and Dutch.
How to check and understand the safety systems.
Instructions for sharpening, replacing, and balancing mower blades.
Procedure for checking the effectiveness of the braking system.
Detailed instructions on how to remove the mower deck.
Procedures for replacing the drive belt on the cutting unit.
Step-by-step guide for replacing the mower drive belt.
Instructions for adjusting the mower deck level side-to-side.
Instructions for adjusting the mower deck level front-to-back.
How to adjust the gear shift lever for the neutral position.
Common problems and solutions for engine starting failures.
Troubleshooting for uneven running, low power, and overheating.
Solutions for battery, lighting, vibration, and cutting problems.
Steps for preparing the machine for storage.
Information on ordering spare parts and warranty service.
