EasyManua.ls Logo

Husqvarna LTH 141 User Manual

Husqvarna LTH 141
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Euro
532 44 63-33
LTH 141
Instruction manual
Please read these in struc tions care ful ly
and make sure you un der stand them before
using this ma chine.
Manuel d’instructions
Merci de lire trés attentivement le manuel
d'instructions. Assurez-vous d'avoir tout
compris avant d'utiliser ce tracteur.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en zorg
dat u ze begrijpt voordat u deze ma chine
gebruikt.
Manual de las instrucciones
Por favor lea cuidadosamente y comp-
renda estas intrucciones an tes de usar
esta maquina.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorgfältig
durch und vergewissern Sie sich, daß Sie
diese verstehen, bevor Sie die Maschine
in Betrieb nehmen.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Husqvarna LTH 141 and is the answer not in the manual?

Husqvarna LTH 141 Specifications

General IconGeneral
BrandHusqvarna
ModelLTH 141
CategoryLawn Mower
LanguageEnglish

Summary

Safety Rules

PREPARATION

Reduce risk of fire, inspect and remove debris before, during, and after mowing.

OPERATION

Mow only in daylight, avoid slopes over 15°, use care when pulling loads, watch for traffic.

MAINTENANCE AND STORAGE

Keep nuts/bolts tight, store fuel safely, keep engine clean, check grass catcher.

Assembly

Install battery

Charge battery if needed. Remove jewelry before installing. Connect cables properly.

Functional description

Connection/disconnection of the cutting unit

Lever forward to engage drive, backward to disengage. Blades rotate or brake.

Ignition Lock

Four positions: OFF, ROS ON, ON, START. Controls engine and reverse operation system.

Before starting

Filling up

Use unleaded petrol, do not overfill, check cap, store fuel safely. Warning: petrol is flammable.

Oil level

Check oil level between markings. Add SAE 30, or SAE 5W-30 in winter. Ensure tractor is horizontal.

Driving

Starting of motor

Ensure cutting unit is in transport position, clutch disengaged. Check controls and brake/clutch pedal.

Ignition key operation

Turn key to START, do not exceed 5 seconds. Wait 10 seconds before next try.

Operator Presence System and Safety Switch

Machine stops engine if operator leaves seat with cutting unit engaged. Safety switch function.

Driving on Slopes

Do not drive on slopes exceeding 15°. Avoid stopping/starting on slopes.

Switching off the engine

Move clutch to disengaged, throttle to fast, lift unit, turn key to STOP. Warning: Never leave key in machine.

Maintenance, adjustment

Blades

Keep blades sharp, replace bent/damaged blades. Sharpen equally to avoid imbalance.

Servicing Procedures

Before servicing, press brake/clutch pedal, engage parking brake, set lever to neutral, disengage clutch, turn off engine, remove spark plug wire.

Operator Presence and Reverse Operation Systems

To Check Brake

Adjustment of the cutting unit

Troubleshooting

Related product manuals