To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna MS 360 G and is the answer not in the manual?
Explains various warning symbols found on the equipment for safe operation.
Details the different warning classifications used in the manual (Warning, Caution, Notice) and their implications.
Highlights health risks from dust inhalation, including respiratory diseases and cancer, from cutting materials with silica.
Advises on protective measures against dust, mist, and fumes, including wearing masks and wet cutting.
Outlines the owner's duty to ensure operators are trained and understand the manual for safe machine use.
Describes the machine's key attributes, such as light and mobile design, easy cleaning, and cutting capacity.
Details the foldable and height-adjustable stand accessory, facilitating easier use and storage.
Describes the fixed stand accessory, which may require leveling material for stability.
Emphasizes using the machine only with functional safety equipment and seeking repair for defects.
Stresses the importance of using guards and checking them for damage to prevent thrown fragments.
Instructs on checking the engine's OFF switch function for safety and replacing defective switches.
Warns against running the water pump dry and requires its use only as directed in the manual.
Warns about blade breakage and heat deformation, advising proper use and bushing selection.
Explains how to sharpen dull diamond blades by cutting soft materials like sandstone or brick.
Strongly warns against using toothed blades like wood cutting blades due to severe injury risk.
Advises using blades intended for specific materials and avoiding cutting plastics with diamond blades.
Highlights dangers of engine exhaust in confined spaces and flammability of fuel and fumes.
Specifies using unleaded gasoline of at least 87 octane and checking engine oil level.
Provides precautions for refueling, including no smoking, cooling the engine, and slow fuel cap removal.
General instructions for safe assembly and placement of the machine.
Step-by-step guide to securely attach the saw to its stand.
Instructions for setting the correct working height for the adjustable stand.
How to adjust the depth stop for safe cutting depth, ensuring correct blade rotation.
Details essential personal protective equipment like eye protection, gloves, and hearing protection.
Covers fundamental safety rules for machine operation, including training and machine cleanliness.
Stresses keeping the work area clear, well-lit, and free from distractions for accident prevention.
Advises against operating while fatigued or impaired, and ensuring no objects are on the machine.
Warns against grinding with the blade side, emphasizing using only the cutting section for safety.
Explains the plunge cutting technique using the cutting arm's adjustable depth.
Describes the water system for dust suppression and advises on adjusting water flow for optimal control.
Details folding the adjustable stand for easier moving and space saving.
Explains storing the legs of the fixed stand within the machine frame when moving.
Advises securing the equipment during transportation to prevent damage and accidents.
Recommends storing the equipment in a lockable area, out of reach of children and unauthorized persons.
Lists essential pre-operation checks including reading the manual, PPE, fuel cap, and area safety.
Outlines the procedure for starting the engine, including priming the pump and using the starter cord.
Describes how to safely stop the engine by turning the start switch to OFF.
Specifies that only manual tasks should be done by the user; extensive work requires an authorized workshop.
Covers routine checks of safety equipment, cleaning the machine, and checking trays.
Instructions on adjusting and replacing the drive belt, ensuring correct tension and specified parts.
Advises running the water system briefly to prevent blockages and warns against using water on motor parts.
Details lubricating the adjustable stand's guide tracks with grease for smooth operation.
Provides detailed specifications for the engine, cooling, cutting equipment, and dimensions of the machine.
General