Do you have a question about the Husqvarna MS 355 and is the answer not in the manual?
Guidance on proper operation, maintenance, and safety practices.
Prohibitions on unsafe operation, maintenance, and misuse.
Daily maintenance checks and cleaning procedures.
Maintenance tasks required every 50 hours of operation.
Overview of the saw's capabilities and intended use.
Steps for assembling the machine and optional accessories.
Pre-operational checks for safety and readiness.
Instructions for mounting and aligning the cutting blade.
Detailed procedures for wet/dry configuration and operation.
Troubleshooting steps for motor/engine stoppage during use.
Cleaning procedures and daily checks for all models.
Maintenance for gasoline engine: air cleaner, oil checks, and changes.
Procedure for adjusting the 'Sta-Level' blade guard.
Wiring diagram for the 1-1/2 HP Electric Motor S.V.
Wiring diagram for the 1-1/2 HP Electric Motor D.V.
Wiring diagram for the 2 HP Electric Motor.
Wiring diagram for the 2 HP Electric Motor operating at 50Hz.
Wiring diagram for the 3 HP Electric Motor (1-Phase).
Wiring diagram for the 3 HP Electric Motor (3-Phase).
Wiring diagram for the 5.5 HP Honda Gasoline Engine.
Steps to avoid dust inhalation and skin contact during cutting.