Need help?Do you have a question about the Husqvarna NUDA 900 MY12 and is the answer not in the manual?
General| Year | 2012 |
|---|---|
| Manufacturer | Husqvarna |
| Model | NUDA 900 |
| Displacement | 898 cc |
| Cooling System | Liquid |
| Ignition | Digital |
| Transmission | 6-speed |
| Final Drive | Chain |
| Engine Type | Parallel twin, four-stroke |
| Power | 105 hp (77 kW) @ 8500 rpm |
| Torque | 100 Nm (7000 rpm) |
| Fuel System | Electronic fuel injection |
| Frame | Steel trellis |
| Rear Suspension | Monoshock |
| Front Brakes | Dual 320mm discs, 4-piston calipers |
| Rear Brakes | Single 240mm disc |
| Front Tire | 120/70-17 |
| Rear Tire | 180/55-17 |
Warranty conditions, standard settings, and competition use exclusions for NUDA 900 models.
Guidelines for replacing parts, emphasizing the use of original Husqvarna parts.
Warning about operating the engine in ventilated areas due to carbon monoxide.
Cautionary advice regarding burns when working on hot engine or exhaust parts.
Flammability and explosiveness warnings for fuel, including safe refueling practices.
Warnings about coolant ignition and toxicity, and not removing the radiator cap when hot.
Corrosive nature of brake fluid, protection advice, and immediate medical attention for eye contact.
Warnings about battery recharge hazards and handling of corrosive liquid.
Specifications for engine type, cooling, bore, stroke, displacement, and compression ratio.
Specifications for the upside-down hydraulic fork, including leg diameter and wheel travel.
Details on the hydraulic monoshock absorber, with adjustable spring preload and rebound damping.
Details on the twin floating disc front brake with radial pump and callipers.
Information on the fixed disc rear brake with floating calliper.
Instructions for refueling the motorcycle with unleaded petrol, including safety precautions.
Safety warnings regarding fuel flammability and explosiveness during refueling.
Caution against overfilling the fuel tank and ensuring the cap is closed securely.
Warning that the stand is designed for the motorcycle only and not for rider support.
Note that the stand does not have automatic retraction and includes a safety switch.
Warns when the coolant reaches an alarm temperature, requiring engine shutdown.
Indicates engine ECU malfunction, with different warnings for critical or emergency faults.
Indicates when scheduled maintenance is due; contact dealer.
Describes the factory default setting delivering maximum engine power.
Explains the 'RAIN' mapping for reduced power, suitable for wet roads or low grip.
Procedure for adjusting the throttle control position.
Procedure for adjusting the front brake lever position and its stop switch.
Explanation of the 'OFF', 'ON', and steering lock positions of the ignition switch.
Procedure for adjusting the clutch control lever and its stop switch.
Description of the rear brake control and its stop switch function.
Procedure for operating the gear shift lever, including neutral and warnings.
List of general inspections to perform before riding the motorcycle.
Importance of correct engine running-in for longevity and performance.
Guidelines for achieving optimal performance after the first 1000 km of running-in.
Troubleshooting steps for an engine that does not start.
Troubleshooting steps for engine starting issues, including spark plug and battery.
Troubleshooting steps for engine overheating, including airflow and coolant issues.
Troubleshooting steps for reduced engine power, covering air filter, spark plug, and clearance.
Troubleshooting steps for engine knocking, related to carbon deposits and spark plugs.
Troubleshooting steps for alternator charging issues, including connections and voltage regulator.
Troubleshooting step for battery overheating, often related to the voltage regulator.
Troubleshooting step for difficulty in shifting gears, relating to clutch regulation.
Pre-ride checks: side stand up, rear footrests closed, passenger awareness.
Warning about careful use of front and rear brakes, especially on slippery surfaces.
Warning to use the emergency stop button only in emergencies and with extreme caution.
Warning about controlling the motorcycle with brakes and steering during malfunction.
Procedure for checking the engine oil level after warming up the engine.
Procedure for checking the coolant level in the expansion tank.
Procedure for checking and accessing the air filter.
Warning about mushy brake lever indicating potential air in lines or defective brake.
Warning that incorrect free play can lead to premature brake pad wear and total ineffectiveness.
Warning about mushy brake pedal indicating potential air in lines or defective brake.
Information on factory suspension settings and dealer assistance for special requirements.
Warning that Motard version suspension is for track use only, not road use.
Details on Nuda 900 R shock absorber with adjustable compression and rebound damping.
Procedure for checking, adjusting, and lubricating the drive chain for safety and wear prevention.
Warning that correct tyre pressure and condition enhance comfort and prevent loss of grip.
To Next Page