Need help?Do you have a question about the Husqvarna P-ZT26 CE and is the answer not in the manual?
General| Engine Power | 23 hp |
|---|---|
| Cutting Height | 1.5 - 5 inches |
| Transmission | Hydrostatic |
| Deck Material | Steel |
| Warranty | 3 years |
Expresses thanks for purchasing the mower and highlights its efficiency and control panel.
Defines terms used in the manual and notes about product specification changes.
Instructions and warnings regarding the safe transport of the machine on public roads.
Guidelines and cautions for safely towing equipment with the mower.
Explains the machine's intended use and general safety principles for operation.
Explanation of warning and important information symbols used in the manual and on the machine.
Identification and meaning of symbols representing machine controls like R, N, Fast, Slow, Choke, and Fuel.
Explanation of symbols related to CE conformity, prohibited actions, eye/hand protection, noise, and EMC.
Essential safety rules and warnings for operating and maintaining the machine safely.
Guidance on essential personal protective equipment (PPE) for operator safety.
Guidelines for safe operation on slopes, including restrictions and best practices.
Safety measures to prevent injury to children around the operating machine.
Detailed safety instructions for handling gasoline to prevent fire and explosion hazards.
Safety precautions to be followed during routine maintenance and cleaning of the machine.
Safety measures and warnings for loading, unloading, and transporting the machine.
Important safety information and warnings related to towing equipment with the mower.
Information on the availability and necessity of a spark arrestor for certain operating environments.
Information and warnings concerning the proper use and limitations of the Rollover Protection System.
Diagram identifying the location of all major controls on the machine.
Detailed explanation of how to operate the steering controls for movement and turning.
Explanation of the hour meter's display, oil change indicator, and reset function.
Procedure for adjusting the tracking knob to ensure the mower travels in a straight line.
How to engage and release the parking brake, with important operational notes.
Description of the blade switch used to engage and disengage the mower deck blades.
Instructions for starting, running, and stopping the engine using the ignition switch.
Details on the location and function of the three fuses protecting the machine's electrical system.
Explanation of the choke control's function for cold starts and richer fuel mixture.
Procedure for adjusting the mower deck to the desired cutting height for optimal grass cutting.
How to adjust the operator's seat lengthways for comfort and proper positioning.
Location and operation of the fuel shut off valve with its three positions: left, off, and right.
Explanation of the hydro release levers used for manually moving the machine.
Essential safety information and procedures for refueling the machine, including fuel type and tank capacity.
Guidance for new operators on familiarizing themselves with the mower's unique steering capabilities.
Detailed instructions on how to control speed, direction, turn, and perform zero-turns.
Instructions on operating the unit with the roll bar up and using the seat belt for safety.
Essential checks and conditions that must be met before starting the engine.
Step-by-step guide on how to safely start the engine, including safety interlocks.
Procedures for dealing with a weak battery and using jumper cables safely.
Instructions on how to release the brake, engage blades, and move the mower.
Guidelines for safely operating the mower on slopes, including speed and turning advice.
Steps required to properly stop the engine and secure the machine.
Advice on achieving optimal mowing results, including cutting height, speed, and deck cleaning.
Procedure for engaging bypass linkages to manually push or pull the mower.
Routine checks to be performed daily to ensure the machine is in safe working order.
A list of maintenance tasks to be performed periodically based on usage or time.
Details on maintenance tasks required at specific hour intervals (50h, 250h, 500h) and annually.
Critical safety checklist and procedures to follow before performing any service or adjustment.
Instructions for battery cleaning, charging, removal, and installation.
How to verify the proper functioning of the machine's safety system interlocks.
Procedures for checking tire pressure and verifying parking brake functionality and adjustment.
Step-by-step guide for removing and installing the mower deck belt.
Instructions for replacing the pump belt, including removal and installation procedures.
Guidance on inspecting V-belts for wear and damage at specified intervals.
Information on maintaining cutting blades, including sharpening, replacement, and safety during handling.
Procedure for leveling the mower deck to ensure an even and quality cut.
How to adjust anti-scalp rollers to prevent deck scalping in various terrain conditions.
Instructions for checking, removing, and installing caster wheels, including torque specifications.
Guidelines for checking hardware and performing regular cleaning for machine longevity.
Recommended external maintenance procedures for the ZT-3400 Powertrain™.
A table outlining lubrication points and intervals for various components of the machine.
General advice on lubrication, including grease types, oil, and cleaning excess lubricant.
Specific instructions for lubricating front wheel mounts, bearings, and deck spindles.
Detailed steps for changing the fluid and filter in the transaxle (transmission).
Common causes and solutions for the engine failing to start or the starter not turning.
Troubleshooting steps for an engine that runs rough or seems weak, including potential causes.
Diagnosing and resolving issues like machine vibration, overheating, battery charging, movement, and deck engagement.
Steps for preparing the machine for long-term storage, including fuel system treatment and cleaning.
Crucial safety warnings regarding storing engines with fuel indoors or in poorly ventilated areas.
Advice on ordering spare parts and scheduling annual maintenance checks.
General guidelines for torque values for standard and metric hardware, including hex head cap screws.
Technical details about the engine, including manufacturer, type, power, fuel, and cooling system.
Technical data for the transmission, including type, speed controls, and brake system.
Specifications related to the mower's frame, cutting decks, dimensions, and weight.
Data on vibration levels at the steering lever and seat, and noise emission levels.
Information on machine compliance with USA state requirements and EU directives, including noise and EMC.
A checklist of actions to be performed during initial delivery service of the machine.
A checklist for maintenance tasks to be performed after the first 10 hours of operation.
Checklist for daily maintenance tasks to ensure the machine is ready for use.
A checklist for maintenance tasks to be performed every 50 hours of operation.
A checklist for maintenance tasks to be performed every 250 hours of operation.
A checklist for maintenance tasks to be performed every 500 hours of operation.
A checklist for maintenance tasks that should be performed at least once each year.
To Next Page
