To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna P-ZT6126 and is the answer not in the manual?
General| Engine Manufacturer | Kawasaki |
|---|---|
| Engine Power | 26 hp |
| Fuel Type | Gasoline |
| Cutting Width | 61 inches |
| Cutting Height, min | 1.5 inches |
| Blade Tip Speed | 18, 000 ft/min |
| Transmission Type | Hydrostatic |
| Transmission Manufacturer | Hydro-Gear |
| Engine Type | V-Twin |
| Cutting Height, max | 5 inches |
| Deck Material | Steel |
| Warranty | 3 years |
| Turning Radius | Zero Turn |
Orientation and design updates are subject to change without notice.
Safety precautions for transporting the machine on public roads.
Safety and procedural advice for towing equipment with the machine.
General guidelines and safety principles for operating the mower.
Information on obtaining quality service and support from retailers.
Details on locating machine and engine identification numbers for parts.
Explanation of warning and important information symbols used in the manual.
Explanation of symbols for gear selection, fuel, and controls.
Explanation of CE, noise, and EMC compliance markings.
Illustrations and meanings of various safety symbols.
Critical safety warnings and key rules for operating the machine.
Safety regarding traffic, general handling, and hazardous emissions.
Recommendations for protective gear and safety on slopes.
Precautions for children and safe refueling practices.
Safety during maintenance, electrical hazards, and battery handling.
Safety measures for transport and rollover protection systems.
Identifies and labels key controls on the machine.
Explains how to operate steering and speed controls.
Description of the hour meter and tracking knob adjustment.
Operation of key controls like brake, blades, and ignition switch.
Operation of fuses, choke control, and cutting height pedal.
Operation of seat adjustment, fuel valve, and hydro release levers.
Instructions and warnings for refueling the machine.
Advice for new operators and basic steering maneuvers.
Pre-start checks and proper use of safety features.
Step-by-step guide to starting the engine.
Continues engine starting and initial operation guidance.
Jump-starting procedure and general running.
Steps for operating the machine and setting cutting height.
Safety and operational advice for slopes.
Procedure for safely shutting down the engine.
Recommendations for optimal mowing results.
How to push or pull the mower when the engine is off.
Overview of daily, interval, and pre-service tasks.
Detailed checklist for service tasks.
Servicing, charging, and replacement of the battery.
Checking safety interlocks, tire inflation, and brake function.
Procedures for deck belt replacement.
Procedures for pump belt replacement and V-belt inspection.
Importance of blade condition and replacement steps.
Instructions for deck height adjustment and leveling.
Adjusting rollers and servicing caster wheels.
Checking hardware, cleaning, and powertrain checks.
Schedule of lubrication points and general greasing.
Specific greasing for wheels and spindles.
Procedure for changing transmission fluid.
Troubleshooting for starting, running, and weak engine issues.
Troubleshooting vibration, movement, deck engagement, and mowing quality.
Steps for preparing the machine for long-term storage.
Advice on ordering parts and annual servicing.
Diagram showing the machine's electrical components and connections.
General torque values for various hardware sizes.
Technical details for specific engine and transmission models.
Physical and frame-related technical data.
Technical details for additional engine/transmission models.
Physical and frame-related technical data for additional models.
Information on compliance labels and certificates.
Items to check during initial delivery service.
Maintenance tasks to be performed after 10 hours of operation.
Routine daily maintenance tasks.
Maintenance tasks to be performed every 50 hours.
Maintenance tasks to be performed every 250 hours.
Maintenance tasks to be performed every 500 hours.
Maintenance tasks to be performed annually.
