EasyManua.ls Logo

Husqvarna PZ34 User Manual

Husqvarna PZ34
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Please read the operator manual carefully and make sure you
understand the instructions before using the machine.
Gasoline containing up to 10% ethanol (E10) is
acceptable for use in this machine. The use of any
gasoline exceeding 10% ethanol (E10) will void
the product warranty.
Operator Manual
PZ34 / 966553901

Other manuals for Husqvarna PZ34

Question and Answer IconNeed help?

Do you have a question about the Husqvarna PZ34 and is the answer not in the manual?

Husqvarna PZ34 Specifications

General IconGeneral
Fuel TypeGasoline
Transmission TypeHydrostatic
Cutting Height, min25 mm
Cutting Height, max100 mm
Deck MaterialSteel
Wheel Size13 inch

Summary

Safety Information

Slope Operation Safety

Crucial guidelines and warnings for operating on slopes to prevent accidents.

Children Safety Precautions

Warnings and recommendations to keep children away from the operating area.

Safe Gasoline Handling

Precautions for handling flammable gasoline and refueling safely.

Battery Safety Precautions

Warnings about handling batteries, lead compounds, and corrosive acid.

Electrical Sparking Prevention

Safety routines to avoid electrical sparking and battery explosion.

Transport and Towing Safety

Guidelines for safe transport, loading, unloading, and towing.

Rollover Protection System (ROPS)

Information on ROPS, its weight, and usage guidelines.

Operator Controls and Functions

Motion Control Lever Operation

Explanation of how to operate the steering controls for movement and turning.

Fuel Tank Information

Information on fuel capacity, type, and safety during refueling.

Machine Operation Procedures

Steering and Maneuvering

Detailed explanation of forward, backward, and turning maneuvers.

Roll Bar and Safety Belt Usage

Proper use of the roll bar and seat belt for safety.

Pre-Operation Checklist

Checklist of essential steps before starting the mower.

Starting the Engine

Step-by-step procedure for starting the mower's engine.

Machine Running Procedure

Steps to release parking brake, engage controls, and start mowing.

Operating on Hills

Safety instructions and techniques for mowing on slopes.

Stopping the Engine Safely

Step-by-step guide to safely stop the mower's engine.

Maintenance Procedures

Safety System Check

Explanation of the safety system and how to check its functionality.

Parking Brake Adjustment

Step-by-step guide for adjusting the parking brake linkage.

Mower Deck Leveling

Procedure for leveling the mower deck for optimal cutting.

Lubrication Guide

Hydraulic Drive Fluid and Filter Change

Procedure for changing hydraulic fluid and filter.

Transmission Purging Procedures

Steps to purge air from the hydrostatic transmission system.

Troubleshooting Common Issues

Engine Starting Problems

Common causes and solutions for engine failure to start.

Starter Motor Issues

Troubleshooting steps when the starter does not turn the engine over.

Rough Engine Performance

Causes and remedies for an engine running rough.

Engine Overheating Causes

Reasons for engine overheating and how to resolve them.

Machine Movement Problems

Diagnosing slow, uneven, or no machine movement.

Mower Deck Engagement Failures

Causes and fixes for the mower deck failing to engage.

Uneven Mowing Diagnosis

Identifying and correcting causes of uneven mowing.

Wiring Diagram

Technical Data Specifications

Related product manuals