T
Thomas MullenAug 17, 2025
How to troubleshoot a Husqvarna PW 360 that won't start?
- Cchelsea07Aug 18, 2025
If your Husqvarna Pressure Washer isn't starting, check these potential causes: * Ensure the power plug is securely connected to a functioning power source. * Verify the power switch is in the on (I) position. * The thermal protector may have stopped the power. If so, allow the product to cool down before attempting to use it again. * Confirm that you are using the correct type of extension cable, fully unwound, and that its voltage matches the product's voltage. If these steps don't resolve the issue, there may be no electricity in the power source, or the power cord could be damaged. In these cases, consult an approved electrician or service agent.