Husqvarna PW 350 User Manual (English)

Other manuals for Husqvarna PW 350

Workshop Manual28 pages

User Guide12 pages

Questions and Answers:

A
Andrew ValentineAug 18, 2025
How to troubleshoot a Husqvarna PW 350 that won't start?
- G
  gutierrezwendyAug 18, 2025
  If your Husqvarna Pressure Washer isn't starting, check these potential causes: * Ensure the power plug is securely connected to a functioning power source. * Verify the power switch is in the on (I) position. * The thermal protector may have stopped the power. If so, allow the product to cool down before attempting to use it again. * Confirm that you are using the correct type of extension cable, fully unwound, and that its voltage matches the product's voltage. If these steps don't resolve the issue, there may be no electricity in the power source, or the power cord could be damaged. In these cases, consult an approved electrician or service agent.
D
Daniel EspinozaAug 20, 2025
Why is the water pressure unsatisfactory on my Husqvarna PW 350 Pressure Washer?
- J
  jacksonstuartAug 20, 2025
  If the water pressure from your Husqvarna Pressure Washer is not satisfactory, consider the following: * Make sure there are no bends in the hoses. * Ensure the power switch is in the on (I) position. * Verify the product is correctly connected to the water source and that the water flow is sufficient. * Clean the water filter. * Bleed the system to remove any air. * Use the correct accessory.
A
annamccormickAug 23, 2025
How to fix a Husqvarna Pressure Washer high-pressure water hose that is stuck?
- M
  Mrs. Rebecca JohnsonAug 23, 2025
  If the high-pressure water hose on your Husqvarna Pressure Washer is not possible to pull out, the hose reel is likely blocked. Remove the hose reel cover, remove the blockage, and clean the hose reel.
O
omooreAug 26, 2025
What to do if the display does not start on my Husqvarna PW 350 Pressure Washer?
- C
  Christopher WoodAug 26, 2025
  If the display on your Husqvarna Pressure Washer doesn't start when you turn the power switch to the ON (I) position, the power plug may not be connected to a power source. Connect the power plug to a power source.
R
Richard LarsonAug 28, 2025
Why does my Husqvarna PW 350 become too hot?
- M
  Mary BullockAug 28, 2025
  If your Husqvarna Pressure Washer becomes too hot, the air flow may not be sufficient. Clean the air intakes.
F
fdominguezAug 30, 2025
What to do if my Husqvarna PW 350 Pressure Washer does not operate smoothly?
- M
  Melinda GrayAug 31, 2025
  If your Husqvarna Pressure Washer doesn't operate smoothly, there might be air in the system. Bleed the system to resolve this.
D
danielmooreSep 1, 2025
Why does the fuse blow during start or operation of my Husqvarna Pressure Washer?
- A
  alexanderchristinaSep 1, 2025
  If a fuse blows during the start or operation of your Husqvarna Pressure Washer, ensure that you are using a slow-blow fuse that has class "C" or "K".
R
Robert OrozcoSep 4, 2025
What causes leakage in the couplings of my Husqvarna PW 350?
- P
  Paul MosleySep 4, 2025
  If there is leakage in the couplings of your Husqvarna Pressure Washer, the O-rings are likely worn or damaged. Replace the O-rings.
J
Jeffrey CooperSep 6, 2025
What to do if my Husqvarna PW 350 Pressure Washer does not stop?
- S
  Sabrina BarrettSep 7, 2025
  If your Husqvarna Pressure Washer does not stop, disconnect the power plug and speak to an approved service agent because the product is defective.
J
Jonathan JonesSep 9, 2025
What does the red temperature symbol on my Husqvarna PW 350 mean?
- J
  Jenna FreemanSep 9, 2025
  To address the red temperature symbol on your Husqvarna Pressure Washer, consider the following: * Ensure the ambient temperature is 4 °C or more during operation. * Store the product in a dry, frost-free environment where the temperature is above 0 °C. * Verify the water inlet temperature does not exceed 40 °C.

Husqvarna PW 350 Specifications

General

Brand	Husqvarna
Model	PW 350
Category	Pressure Washer
Language	English

Summary

Introduction

Product description

Provides a detailed overview of the electrical high-pressure washer and its capabilities.

Intended use

Specifies the domestic cleaning purpose and limitations of the product's use.

Product overview

Lists and illustrates the main components and parts of the pressure washer.

Display overview (PW 370)

Explains the display functions and information shown on the PW 370 model.

Symbols on the product

Details the meaning of various symbols and safety icons found on the product.

Safety

Product damage

Outlines conditions under which the manufacturer is not responsible for product damage.

Safety definitions

Explains the meaning of WARNING, CAUTION, and NOTE used in the manual.

General safety instructions

Provides fundamental safety rules for operating the product safely and responsibly.

Safety instructions for operation

Details crucial safety precautions to follow during the operation of the pressure washer.

Safety devices on the product

Describes the safety mechanisms incorporated into the product for user protection.

Personal protective equipment

Recommends essential PPE for safe operation and protection against potential hazards.

Safety instructions for maintenance

Specifies critical safety guidelines to follow before performing any maintenance on the product.

Assembly

To install the garden hose adapter

Step-by-step guide on how to attach the garden hose adapter to the water inlet.

To install the holder for the spray handle and the spray lance

Instructions for mounting the holder for spray accessories onto the main unit.

Operation

Husqvarna Connect

Information about the mobile app for extended product features and support.

To unfold and fold the transport handle

Guides on how to operate the transport handle for mobility and storage.

To install the spray handle

Instructions for connecting the spray handle to the high-pressure water hose.

To remove the spray handle

Procedure for safely disconnecting the spray handle from the hose.

To install the spray lance

Steps to attach the spray lance to the spray handle securely.

To remove the spray lance

Procedure for detaching the spray lance from the spray handle.

Nozzles (PW 350)

Details the types of nozzles supplied with the PW 350 and their applications.

To install and remove a nozzle on the spray lance (PW 350)

Explains how to attach and detach nozzles from the spray lance.

To adjust the pressure of the water jet (PW 350)

Describes how to modify the water jet pressure using the adjustable nozzle.

To install and remove the short nozzle for the spray handle (PW 350)

Instructions for fitting and removing the short nozzle onto the spray handle.

Nozzles (PW 360, PW 370)

Describes the nozzles included with the PW 360 and PW 370 models and their settings.

To install and remove the 3-in-1 nozzle for the spray lance (PW 360, PW 370)

Guides on attaching and detaching the versatile 3-in-1 nozzle on the spray lance.

To adjust the water jet (PW 360, PW 370)

Explains how to select different water jet settings using the 3-in-1 nozzle.

To install and remove the short nozzle for the spray handle (PW 360, PW 370)

Instructions for fitting and removing the short nozzle onto the spray handle.

To operate the product

Provides the fundamental steps required to start and use the pressure washer.

To connect the product to a water source

Details how to connect the product to either mains water or an open water source.

To connect the product to the water mains

Step-by-step guide for connecting the pressure washer to a standard water tap.

To connect the product to an open water source

Instructions for connecting the pressure washer to alternative water sources like lakes or barrels.

To bleed the system

Explains the process of removing air from the system before operation.

To disconnect the product from the water source

Procedure for safely disconnecting the product from water supply.

To engage and disengage the power trigger lockout

Details how to use the safety lock for the power trigger.

To start the product

Outlines the procedure for powering on and starting the pressure washer.

To stop the product

Describes the steps for safely shutting down and turning off the pressure washer.

To adjust the angle of the spray handle (PW 360, PW 370)

Explains how to adjust the spray handle angle for different cleaning tasks.

To use the foam sprayer (PW 350)

Instructions for attaching and using the foam sprayer with the PW 350 model.

To use the foam sprayer (PW 360, PW 370)

Guides on attaching and using the foam sprayer with PW 360/370 models, including adjustments.

Maintenance

Maintenance schedule

Provides a schedule for routine inspections and cleaning of the product.

To do a general inspection

Details the steps for performing a general check of the product's condition.

To clean the product

Instructions for general cleaning of the pressure washer's exterior.

To clean the spray lance and the nozzles (PW 350)

Specific steps for cleaning the spray lance and nozzles for the PW 350.

To clean the spray lance and the nozzles (PW 360, PW 370)

Specific steps for cleaning the spray lance and nozzles for the PW 360/370.

To clean the water filter

Guides on how to remove, clean, and reinstall the water filter.

To clean the filter in the foam sprayer

Instructions for cleaning the filter component of the foam sprayer.

To lubricate the O-rings on the couplings

Details on lubricating O-rings on various couplings for proper function.

To remove and install the hose reel cover

Instructions for removing and reattaching the cover of the hose reel.

Troubleshooting

Troubleshooting schedule

A guide to identify and resolve common problems with the pressure washer.

Transportation, storage and disposal

Storage

Guidelines for preparing and storing the product during periods of non-use.

To prepare the product for storage

Specific steps for ensuring the product is ready for safe storage.

Disposal

Information on how to responsibly dispose of the product and its packaging.

Technical data

Accessories

EU Declaration of Conformity

UK Declaration of Conformity

Related product manuals