Husqvarna PZ 29 - Technical Data; Engine Specifications; Transmission Specifications; Frame and Dimensions

ENGINE
Manufacturer Kawasaki
Type FX801V
Power
19.0 kW @ 3600 rpm
1)
Lubrication Pressure with oil lter
Fuel Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%)
Fuel tank capacity 11 gallons
Cooling Air cooled
Air lter Heavy duty canister
Alternator 12v 15 amp @ 3600 rpm
Starter Electric
TRANSMISSION
Transmission Dual pump and wheel motor
Steering control Dual levers, foam gripped
Speed forward 0-12 mph
Speed reverse 0-6 mph
Brakes Disc
Front caster tires 13 x 6.5-6 Flat Free
Rear tires, turf pneumatic 23 x 10-5
Tire pressure 15 PSI / 103 kPa / 1 bar
FRAME
Seat Commercial Premium EVC
Hinged Arm Rests Yes
Service Meter Digital
Blade Engagement Ogura GT 3.5 Clutch
Deck Construction 7 gauge fabricated
DIMENSIONS
Weight 635 kg
Base Machine Length 218 cm
Base Machine Height 121 cm
Base Machine Width 145 cm
Overall Height, ROPS up 183 cm
1)
The power rating as declared
by the engine manufacturer
is the average gross power
output at the specied
RPM of a typical production
engine for the engine
model measured using
SAE Standards for engine
gross power. Refer to the
engine manufacturer engine
specications.
36
TECHNICAL DATA