Technical data
Technical data
R 213C R 216
Dimensions
Length without cutting deck, mm 1960 1960
Width without cutting deck, mm 883 883
Length including cutting deck
1
, mm 2243 2243
Width including cutting deck
1
, mm 994 1000–1080
Height, mm 1120 1120
Weight without cutting deck, with empty
tanks, kg
194 197
Weight including cutting deck
1
, with empty
tanks, kg
231 234
Wheel base, mm 887 887
Track width, front, mm 712 712
Track width, rear, mm 627 627
Tire dimensions 16.5×6.0×8 16.5×6.0×8
Tire pressure, rear – front, kPa / bar / PSI 60 / 0.6 / 8.5 60 / 0.6 / 8.5
Max. gradient, degrees ° 10 10
Engine
Brand / Model Briggs & Stratton / M21 Intek
3125 EFM
Briggs & Stratton / M31 Intek
4155 EFM
Nominal engine output, kW
2
6.7 9.6
Displacement, cm
3
344 500
Max. engine speed, rpm 3000 ± 100 2900 ± 100
Max. speed forward, km/h 9 9
Fuel, min. octane grade 91 91
Tank volume, liters 12 12
Oil Class SF, SG, SH or SJ SAE40,
SAE30, SAE10W-30,
SAE10W-40 or SAE5W-20
Class SF, SG, SH or SJ SAE40,
SAE30, SAE10W-30,
SAE10W-40 or SAE5W-20
Oil volume incl. filter, liters 1.6 1.6
Oil volume excl. filter, liters 1.4 1.4
1
Measured with cutting deck Combi 94
2
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
854 - 003 - 14.11.2018 29
To Next Page
Loading...
