Need help?Do you have a question about the Husqvarna Rider 11 Bio and is the answer not in the manual?
General| Cylinders | 2 |
|---|---|
| Fuel Type | Petrol |
| Transmission | Hydrostatic |
| Drive | Rear-wheel drive |
| Cutting Height Steps | 6 |
| Blades | 3 |
| Cutting System | BioClip (mulching) |
| Warranty | 2 years |
| Seat | armrests |
Essential safety guidelines for operating the machine safely and correctly.
Critical safety advice for operating the machine on inclines to prevent accidents.
Precautions involving children and safety rules for maintenance.
Guidelines for safely transporting the machine to prevent injury or damage.
Identifies and explains the location of various controls on the machine.
Explains the function and operation of the throttle, choke, clutch, and brake controls.
Details how to adjust the cutting unit height and its parallelism.
Guidelines for safely adding fuel and adjusting the operator's seat.
Essential checks to perform before starting the engine and operating the machine.
Step-by-step instructions for starting the engine, covering cold and warm conditions.
Instructions on operating the machine and advice for optimal mowing.
Procedures for starting on a hill and safely stopping the engine and machine.
A detailed schedule of maintenance tasks and intervals.
Instructions for removing machine hoods and fenders for access.
Procedures for checking and adjusting steering wires and brakes.
Replacing the air filter and fuel filter for engine performance.
Adjusting cutting unit ground pressure and parallelism for optimal performance.
How to place the cutting unit in service position for easy access.
Procedures for checking and changing the engine oil.
Lubrication of transmission oil, belt tensioner, and general components.
Steps for preparing the machine for storage, especially winter storage.
To Next Page
