Husqvarna Rider 316T AWD User Manual

EE
EE
nn
nn
gg
gg
ll
ll
ii
ii
ss
ss
hh
hh
Rider 316T Rider 316T AWD
Rider 316Ts AWD Rider 316TXs AWD
Oper ator ′ s manual
Please r ead the operator’s manual carefully and make sure you
understand the instructions before using the machine.

Husqvarna Rider 316T AWD Specifications

General

Brand	Husqvarna
Model	Rider 316T AWD
Category	Lawn Mower
Language	English

Summary

Service Journal

Pre-delivery Service

Initial checks and procedures before machine delivery.

After the First 8 Hours

Maintenance checks after the initial 8 hours of operation.

Introduction

Driving and Transport on Public Roads

Guidelines for safe driving and transporting the machine on public roads.

Use

Explains the intended use and operational limitations of the mower.

Key to Symbols

Symbols

Explanation of various symbols found on the machine and in the manual.

What is What?

What is what on the ride-on mower

Identification and labeling of the main components of the ride-on mower.

Safety Instructions

Safety Instructions

Core safety guidelines and warnings for operating the machine.

General Use

Basic operational safety, understanding controls, and stopping quickly.

Driving on Slopes

Specific safety advice and precautions for operating on sloped terrain.

Presentation

Speed Limiter

Explanation of how the machine's speed is controlled via pedals.

Parking Brake

Step-by-step instructions on how to apply and release the parking brake.

Cutting Height Adjustment Lever

Detailed instructions on how to adjust the cutting height of the mower deck.

Fueling

Essential instructions and safety precautions for refueling the machine.

Driving

Before Starting

Pre-operation checks and essential preparation before starting the engine.

Start the Engine

Step-by-step procedure for starting the engine safely and correctly.

Driving the Rider

Instructions on operating the machine's drive pedals and steering.

Stop the Engine

Safe and correct procedures for stopping the engine and machine.

Maintenance

Maintenance Schedule

A comprehensive schedule of required maintenance tasks and intervals.

Steering Wire Adjustment

How to check and adjust the steering wires for proper control.

Parking Brake Adjustment

Procedures for adjusting the parking brake for optimal stopping performance.

Air Filter Replacement

Instructions for replacing the air filter to maintain engine performance and longevity.

Spark Plug Replacement

Step-by-step procedure for replacing the spark plug for ignition system maintenance.

Safety System Check

How to verify the functionality of the machine's critical safety features.

Fitting the Cutting Head

A detailed guide for attaching the cutting unit to the mower chassis.

Removing the Cutting Unit

Instructions for safely detaching the cutting unit from the mower.

Service Position for Cutting Unit

How to place the cutting unit in a service-friendly vertical position for easier access.

Checking the Blades

How to inspect the cutting blades for damage, sharpness, and tightness.

Lubrication

Checking Engine Oil Level

How to correctly check the engine oil level using the dipstick.

Replacing Engine Oil

Procedures for changing the engine oil and oil filter.

Checking Transmission Oil Level

How to check the oil level in the transmission system.

Storage

Winter Storage

Instructions for preparing the mower for long-term storage, especially winter.

Service

Recommendations for performing service during the off-season.

Technical Data

EC-Declaration of Conformity

Official statement of the machine's compliance with European directives.