17
This operator’s manual describes the Husqvarna Zero
Turn Rider. The rider is tted with a Briggs & Stratton
16 HP* four-stroke overhead valve engine.
Transmission from the engine is made via belt-driven
hydraulic pumps. Using the left and right steering
controls, the ow is regulated and thereby the
direction and speed.
Cutting height handle1.
Park brake2.
Choke/throttle control3.
Ignition switch4.
Motion control levers5.
Blade control lever6.
Fuel tank cap7.
Fuel shut off valve8.
Bypass linkage9.
Control Locations
8058-070
*The power rating of the engines indicated is the average
net power output (at specied rpm) of a typical production
engine for the engine model measured to SAE standard
J1349/ISO1585. Mass production engines may differ from
this value. Actual power output for the engine installed
in the nal machine will depend on the operating speed,
environmental conditions and other variables.
To Next Page
Loading...
