EasyManuals Logo

Husqvarna RZ4622T User Manual

Husqvarna RZ4622T
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
35
MAINTENANCE
Maintenance Schedule
The following is a list of maintenance procedures that
must be performed on the machine. For those points
not described in this manual, visit an authorized
service workshop. An annual service carried out by
MAINTENANCE
Daily At
least
once
each
year
Maintenance interval
in hours
Before After 25 50 100 300
Check the parking brake
Check the engine’s oil level (every refueling)
Check the safety system
Check for fuel and oil leakages
Check/clean the engine’s cooling air intake
Check the mower deck
Check for loose hardware (screws, nuts)
Clean under the mower deck
Start the engine and blades, listen for unusual sounds
Check for damage
Thoroughly clean around the engine
Clean around belts, belt pulleys
Check the tire pressures
Check battery connections
Sharpen
3)
/ Replace mower blades
Clean the engine’s cooling air intake
2)
Clean the air cleaner foam pre-filter
2)
Clean the air cleaner paper filter cartridge
2)
Check/adjust the parking brake
Inspect muffler/spark arrester
an authorized service workshop is recommended to
maintain your machine in the best possible condition
and to ensure safe operation.
Read Maintenance in the Safety section.
1)
First change after 8-10 hours. When operating with a heavy load or at high ambient temperatures,
replace every 50 hours.
2)
In dusty conditions, cleaning and replacement are required more often.
3)
Performed by authorized service workshop.
= Described in this manual
= Not described in this manual
= Refer to the engine manufacturer's manual

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna RZ4622T and is the answer not in the manual?

Husqvarna RZ4622T Specifications

General IconGeneral
Engine Power22 HP
Cutting Width46 inches
TransmissionHydrostatic
Deck MaterialSteel
Turning RadiusZero Turn
Warranty3 years
Cutting Height1.5 - 4 inches
Fuel Capacity3.5 gal

Related product manuals