Engine Frame
Manufacturer Briggs & Stratton Cutting Width 122 cm
Type Endurance Cutting Height 3.8 - 10.2 cm
Power 17.9 kW @ 3600 RPM
1)
Uncut Circle 0
Lubrication Pressure with oil filter Number of Blades 2
Fuel Min 87 octane unleaded (Max
ethanol 10%, Max MTBE 15%)
Blade Length 38 cm
Fuel tank capacity 11.4 liters Anti-scalp Rollers 3
Cooling Air cooled Sprung Seat Standard
Air filter Standard Hinged Arm Rests Optional
Alternator 12V Hour Meter Digital
Starter Electric Blade Engagement Electromagnetic Clutch
Transmission
Deck Construction Stamped
Transmission Hydrostatic transaxles Productivity 10117.1 m
2
/h
Steering control Dual levers, foam gripped
Dimensions
Speed forward 0-10.5 km/h Weight 270 kg
Speed reverse 0-5.6 km/h Base Machine Length 191 cm
Brakes Mechanical park brake Base Machine Height 102 cm
Front caster tires 11 x 6-5 Base Machine Width 111 cm
Rear tires, turf pneumatic 18 x 9.5-8 Overall Width, Chute Up 123 cm
Tire pressure 15 PSI / 103 kPa / 1 bar Overall Width, Chute Down 152 cm
1)
The power rating as declared by the engine
manufacturer is the average gross power output at
the specified RPM of a typical production engine for
the engine model measured using SAE Standards for
engine gross power. Refer to the engine manufacturer
engine specifications.
33
TECHNICAL DATA
To Next Page
Loading...
