Contents
Introduction................................................................... 15
Safety............................................................................18
Assembly...................................................................... 19
Operation...................................................................... 20
Maintenance................................................................. 22
Troubleshooting............................................................ 23
Transportation, storage and disposal...........................
24
Technical data.............................................................. 24
EC Declaration of Conformity....................................... 26
Introduction
Product description
The product is a single phase dust extractor. Dust-laden
air goes through the suction hose into the inlet valve.
The product separates the dust particles from the air.
The particles falls into the plastic bag at the bottom of
the product.
Intended use
This machine is designed for vacuuming and separating
dry, non-combustible dust with an explosion limit value
of >0.1mg/m
3
. Do not use the product for other tasks.
This machine is intended for commercial use, for
example in hotels, schools, hospitals, factories, shops,
offices and rental businesses.
Product overview S 13
1. Pre-filter
2. Jet Pulse Handle
3. HEPA-Filter
4. Hose lock
5. Inlet plug
6. Longopac
connection
7. Longopac holder
8. Manometer
To Next Page
Need help?
General
