What to do if Husqvarna Dust Collector motor does not start?
If the motor of your Husqvarna Dust Collector doesn't start, there could be several reasons. First, ensure the machine is properly plugged in. If it is, the cable might be defective and require replacement. Alternatively, the switch or soft start may be defective, also requiring replacement.
Why Husqvarna Dust Collector motor runs but there is poor suction?
Poor suction in your Husqvarna Dust Collector, despite the motor running, can stem from several issues. Check for a hole in the hose and replace it if necessary. The filter might be clogged, requiring cleaning or replacement. Ensure the top cover is correctly adjusted and not loose. Also, inspect the flap for any dirt accumulation and clean it. Finally, defective gaskets can also cause poor suction, so replace any affected gaskets.
Why Husqvarna Dust Collector motor runs but there is not suction?
If the motor of your Husqvarna Dust Collector is running but there's no suction, it could be due to a few reasons. Make sure the hose is properly connected. If it is, check if the hose is blocked and clean it if necessary. Also, ensure that a dust collection bag is fitted to the system.
What to do if Husqvarna Dust Collector motor stops immediately after starting?
If your Husqvarna Dust Collector's motor stops immediately after starting, it might be due to an incorrect fuse. Ensure you are using the correct fuse. It could also indicate a shortcut in the cable or machine.
General| Model | S 36 |
|---|---|
| Category | Vacuum Cleaner |
| Power Source | Electric |
| Power | 3.6 kW |
| Voltage | 220-240 V |
| Phases | 1 |
| Frequency | 50/60 Hz |
| Max Vacuum | 220 mbar |
| Number of Filters | 3 |
| Pre-filter Type | Conical |
| HEPA Filter | Yes |
| Filter Type | HEPA 13 |
| Dust Container Volume | 45 l |
| Dust Capacity | 20 L |
Defines warning, caution, and note terminology used in the manual.
Provides essential safety guidelines for operating the dust extractor, emphasizing user responsibility and common sense.
Details critical safety precautions related to electrical connections, grounding, and cord usage for the dust extractor.
Instructions for connecting the suction hose adapter securely to the product.
Guidance for operators before commencing use of the dust extractor.
Pre-operation checks, including power and voltage verification against the machine's rating plate.
Essential information on grounding procedures to prevent electrical shock hazards.
Instructions on how to operate the main power switch for starting and stopping the machine.
Explanation of the automatic start/stop feature when used with other equipment.
Step-by-step guide for installing a new dust bag collection system.
General safety warnings and notes for performing maintenance and service on the product.
Provides a schedule for routine checks and replacement of parts based on usage.
Instructions for safely cleaning the dust extractor to prevent dust circulation.
Detailed instructions on how to safely replace the HEPA filter.
Lists common issues, their causes, and recommended solutions for the dust extractor.
Guidelines for safely transporting the dust extractor, including securing the unit.
Instructions for proper storage of the equipment to maintain its condition and safety.
Information on environmentally responsible disposal methods according to local regulations.
Specifications and technical details for the different models of the dust extractor.
Details the warranty period, coverage, limitations, and conditions for Husqvarna equipment.
Lists parts and components that are considered wear items and are excluded from the warranty.
To Next Page
