What to do if the turn signal, brake light, and horn are not functional on my Husqvarna Motorcycle?
If the turn signal, brake light, and horn are not working on your Husqvarna Motorcycle, it could be due to a blown fuse 4 or 6. Replace the affected fuses.
What to do if the speedometer in combination instrument is not functioning on my Husqvarna Motorcycle?
If the speedometer in the combination instrument of your Husqvarna Motorcycle is not functioning, the speedometer wiring harness may be damaged, or the plug-in connector may be oxidized. Inspect the wiring harness and plug-in connector.
What to do if the combination instrument shows nothing on the display of my Husqvarna Svartpilen 250 2022 Motorcycle?
If the combination instrument on your Husqvarna Motorcycle display shows nothing, it might be due to a blown fuse 2 or 7. Replace the affected fuses.
Why is my Husqvarna Svartpilen 250 2022 Motorcycle 12V battery discharged?
If the 12V battery of your Husqvarna Motorcycle is discharged, it might be because the ignition was not switched off when the vehicle was parked. In this case, charge the 12V battery. Another possible cause is that the 12V battery is not being charged by the alternator. You should check the charging voltage and the open-circuit current.
Why is the time not displayed or not correctly displayed on my Husqvarna Svartpilen 250 2022 Motorcycle?
If the time is not displayed correctly on your Husqvarna Motorcycle, the cause may be a blown fuse 2 or 7. Replace the affected fuses.
General| Engine Type | Single-cylinder, 4-stroke |
|---|---|
| Fuel System | Electronic Fuel Injection |
| Transmission | 6-speed |
| Front Suspension | WP APEX 43 |
| Rear Suspension | WP APEX Monoshock |
| ABS | Yes |
| Seat Height | 835 mm |
| Tire Size (Front) | 110/70 - 17 |
| Tire Size (Rear) | 150/60 - 17 |
| Displacement | 248.8 cm³ |
| Maximum Torque | 24 Nm |
| Front Brake | 320 mm disc |
| Rear Brake | 230 mm disc |
| Fuel Tank Capacity | 9.5 liters |
| Weight | 153 kg (dry) |
Explains the meaning of various symbols used in the manual for warnings and information.
Defines the typographical formats used for clarity and emphasis in the document.
Defines the proper and improper uses of the motorcycle, outlining potential dangers.
Explains danger, warning, and caution symbols and their critical safety implications.
Outlines essential safety rules for operating the vehicle, including work rules.
Recommends appropriate protective gear for riding to mitigate injury risks.
Details manufacturer warranty conditions and the importance of adhering to service schedules.
Provides guidelines on using correct fuels and auxiliary fluids, including environmental considerations.
Advises on using approved spare parts and accessories for safety and performance.
Illustrates and labels components visible from the front left side of the motorcycle.
Illustrates and labels components visible from the rear right side of the motorcycle.
Locates the VIN, engine number, key number, and type label for identification.
Details the location of fork and shock absorber article numbers for parts reference.
Explains the function of clutch, brake levers, throttle, and handlebar switches.
Details the operation of the ignition switch and steering lock mechanism.
Covers seat lock, bag carrier, and tool set locations and usage.
Describes the shift lever, foot brake lever, and side stand operation.
Introduces the instrument cluster, its display, and activation process.
Explains various warning lights, error messages, and display indicators.
Details how to view fuel level, trip meters, and range.
Covers adjusting ABS mode, units, clock, and shift speed settings.
Guides on initial checks, controls familiarization, and safe riding practices.
Explains the critical steps for breaking in the engine for longevity.
Advises on proper loading to maintain handling characteristics and safety.
Lists essential checks to perform before every trip for roadworthiness.
Covers starting the engine, engaging gears, and basic riding maneuvers.
Details how to apply brakes effectively and safely under various conditions.
Explains proper methods for stopping, parking, and refueling the motorcycle.
Lists mandatory service tasks and their frequency based on mileage or time.
Outlines recommended service tasks for optimal performance and longevity.
Guides on adjusting the shock absorber spring preload for optimal handling.
Explains how to adjust the handlebar position for rider comfort and ergonomics.
Details procedures for safely lifting the motorcycle using front and rear stands.
Covers removal and installation of side covers, seats, and bag carrier.
Explains checking and adjusting chain tension and inspecting sprockets for wear.
Explains the function, operation, and warnings related to the ABS safety system.
Guides on checking brake disc wear limits and brake lining thickness.
Details procedures for checking and topping up front and rear brake fluid levels.
Explains how to check and adjust the free travel of the foot brake lever.
Provides instructions for removing and installing front and rear wheels safely.
Covers checking tire condition, tread depth, pressure, and age.
Details procedures for removing, installing, and charging the 12-V battery.
Explains how to identify and replace main, ABS, and other electrical fuses.
Guides on checking and adjusting headlight settings for proper visibility.
Explains how to check coolant levels and antifreeze protection against freezing.
Details procedures for draining, filling, and changing the coolant safely.
Guides on checking and adjusting the clutch lever play for smooth operation.
Explains how to adjust the basic position of the shift lever for rider comfort.
Details how to check the engine oil level correctly while the engine is warm.
Provides instructions for changing engine oil, oil filter, and cleaning oil screens.
Offers guidelines for safely cleaning the motorcycle, avoiding electrical damage.
Outlines necessary steps for protecting the motorcycle from road salt and corrosion.
Details steps for preparing the motorcycle for extended storage, including battery care.
Guides on recommissioning the motorcycle after storage, including checks and test rides.
Lists common issues, their causes, and recommended actions for diagnosis.
Provides detailed technical data for the engine, including bore, stroke, and compression.
Lists specifications for frame, suspension, brakes, and tires.
Details electrical system components, battery, fuses, and fluid capacities.
Lists all critical tightening torques for various components and fasteners.
Specifies approved brake fluid, coolant, and engine oil types and standards.
Lists recommended suppliers and products for chain care, lubrication, and cleaning.
Defines important technical terms used throughout the manual for better understanding.
Explains the meaning of various warning and information symbols used in the manual.
To Next Page