Husqvarna TC 342 - Unassembled Parts

5
UNASSEMBLED PARTS
Bagger
Slope Sheet
Keys
(2) Keys
*Installed by Dealer
*Brush Guard Kit
Battery
(2) Hex Bolts
(2) Nut Keps
(2) Bagger Spring Latch
(2) Clevis Pin
(1) Bagger Full
Lever/extension
(2) 5/16 x 18 x 1.5”
Carriage Bolts
(2) 1/4 x 20 x 3/4
Shoulder Bolts
(2) 1/4 x 20
Flange Lock Nuts
(2) 5/16 x 18
Flange Lock Nuts
(4) Retainer Spring Clip
(1) Manual Dump Handle
(2) Left and Right Hand Bagger Pivot
(8) 3/8-16 x 1
Carriage Bolts
(1) Full Lever Shroud
(2) Bagger Support Assemblies
(8) 3/8-16 x 1
Hex Nut
(1) Offset Strut
(2) 3/8-16 x 3/4”
Hex Washer Head Bolt
(1) Front Bagger Frame
(2) Cross Brace
(1) Oil Drain Tube