Husqvarna TE 449 - 511 2011 I.E. User Manual

I.2
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
Workshop Manual Ed. 03-2012
FRONT SUSPENSION
Sommario
Front fork removal ........................................................................................ I.3
Service instructions for Ø48USD Kayaba fork..............................................I.5
Front suspension (TC - TXC) ....................................................................... I.6
Front fork disassembly (TC - TXC) ...............................................................I.7
Front suspension (TE) ................................................................................ I.17
Front fork disassembly (TE) ....................................................................... I.18
Instructions for use of ø50USD fork (SMR) ............................................... I.27
Front suspension (SMR).............................................................................I.28
Components of the fork ..............................................................................I.29
General rules for a proper overhauling .......................................................I.30
Instructions for clamping in the vice ........................................................... I.31
Problems - Possible causes - Solutions .....................................................I.32
Cleaning the dust seal ............................................................................... I.33
Bleeding the air...........................................................................................I.33
Draining the oil............................................................................................I.34
Braking down the pumping element and the bottom valve .........................I.35
Braking down the fork leg – slider and removing the oil seals....................I.37
Overhauling and modifying the cartridge and bottom valve setting ............I.38
Cartridge overhauling (rebound braking) ....................................................I.38
Bottom valve overhauling (compression braking).......................................I.39
Re- assembling the fork leg – slider and oil seals ...................................... I.40
Re- assembling the pumping element unit and the bottom valve ...............I.42
Filling with oil ..............................................................................................I.45

Husqvarna TE 449 - 511 2011 I.E. Specifications

General

Brand	Husqvarna
Model	TE 449 - 511 2011 I.E.
Category	Motorcycle
Language	English