Need help?Do you have a question about the Husqvarna TE125 2012 and is the answer not in the manual?
General| Displacement | 124.8 cc |
|---|---|
| Cooling System | Liquid cooled |
| Fuel System | Carburetor |
| Ignition | Electronic |
| Transmission | 6-speed |
| Final Drive | Chain |
| Starter | Kick |
| Front Tire | 90/90-21 |
| Engine Type | Single cylinder, 2-stroke |
| Bore x Stroke | 54 mm x 54.5 mm |
| Rear Suspension | Mono shock |
| Front Brake | Single disc, 260 mm |
| Rear Brake | Single disc, 220 mm |
| Dry Weight | 96 kg |
| Fuel Capacity | 8.5 liters |
Provides critical information regarding warranty and usage.
Explains the meaning of WARNING, CAUTION, and Note symbols in the manual.
Emphasizes using only genuine Husqvarna original parts.
Outlines essential safety measures to protect children around the motorcycle.
Identifies and labels all major controls on the handlebars and footpegs.
Explains the function and use of the supplied keys.
Details wheelbase, length, width, and fluid capacities.
Specifies recommended lubricants, fluids, and parts for maintenance.
Explains fuel cock positions and fuel recommendations.
Details correct side stand deployment and safety warnings.
Guides on using the starting device for cold engines.
Describes the dashboard display, warning lights, and basic functions.
Explains viewing speed, odometer, trip meters, and unit conversion.
Details setting and resetting the onboard clock.
Covers the lap timer and hour counter functions.
Explains viewing engine RPM alongside speed.
Details adjusting throttle twistgrip and front brake lever position.
Describes the ignition switch positions and their functions.
Guides on locking and unlocking the steering mechanism.
Details controls on both the right and left handlebar switch clusters.
Explains operation and adjustment of clutch, rear brake, and gear shift controls.
Lists essential checks to perform before every ride for safety.
Details the critical steps for breaking in the new motorcycle.
Provides solutions for common engine starting and running problems.
Explains how to immediately stop the engine in critical situations.
Details the process for checking and changing engine oil and filters.
Explains how to adjust the engine's idle speed using the adjuster screw.
Details checking the spark plug gap, condition, and correct replacement procedure.
Explains how to check the front brake fluid level and associated warnings.
Details how to adjust the position of the rear brake pedal.
Guides on setting the correct free play for the rear brake pedal.
Explains how to check the rear brake fluid level and warnings.
Details adjusting the clutch cable tension for proper lever free play.
Guides on adjusting the starter lever free play.
Explains how to adjust the rear shock absorber for rider and passenger.
Details the procedure for adjusting spring preload on the rear shock absorber.
Step-by-step guide for safely removing and reinstalling the front wheel.
Covers rear wheel removal, tyre inflation, and wear replacement guidelines.
Identifies key brake components and details periodic system inspection.
Provides guidelines for battery maintenance, storage, and handling warnings.
Details how to connect and use a battery charger safely.
Step-by-step instructions for replacing headlamp and parking light bulbs.
Information on tail light function and replacing the number plate bulb.
Details the procedure for preparing the motorcycle for extended periods of inactivity.
Provides guidelines for cleaning the motorcycle, including parts to protect.
To Next Page