To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna TE125 2011 and is the answer not in the manual?
General| Engine Type | Single cylinder, 2-stroke |
|---|---|
| Displacement | 124.8 cc |
| Cooling System | Liquid cooled |
| Transmission | 6-speed |
| Front Tire | 90/90-21 |
| Rear Tire | 120/90-18 |
| Starter | Kickstarter |
| Bore x Stroke | 54 mm x 54.5 mm |
| Front Suspension | 48 mm |
| Rear Suspension | WP monoshock |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Fuel Capacity | 8.5 L |
| Wheelbase | 1, 475 mm |
| Seat Height | 970 mm |
| Fuel System | Carburetor. Keihin PWK 36 |
| Ignition | Electronic ignition (CDI) |
Introduction to the Husqvarna motorcycling family and the owner's manual's purpose.
Important notices regarding model specifics, warranty exclusions for competition use.
Guidance on manual notes and using only original Husqvarna parts for replacements.
Safety warnings for post-crash inspection, protective gear, and child safety.
Information on identifying the vehicle's chassis and VIN numbers.
Identification of key controls and information about the supplied keys.
Detailed technical specifications for engine, transmission, chassis, and brakes.
Specifications for tyres, motorcycle dimensions, weight, and fluid capacities.
Recommended lubricants and fluids for various motorcycle components.
Explanation of the fuel cock operation and recommended fuel type.
Instructions and warnings for safe operation and use of the side stand.
Explanation of the digital dashboard functions, warning lights, and notes.
Information on speed, odometer, trip 1, and unit conversion procedures.
Details on speed, clock functions, and lap timer operation.
Explanation of speed, RPM display, and hour counter functions.
Description and adjustment of throttle twistgrip and front brake lever.
Explanation of the ignition switch positions and their functions.
Instructions for locking and unlocking the motorcycle's steering.
Description of controls on the right and left handlebar switches.
Procedure for adjusting the clutch control lever cable tension.
Details on rear brake control and gear shift lever operation with safety cautions.
Essential pre-ride checks and general advice for using the motorcycle.
Guidelines for the initial break-in period to ensure engine longevity and performance.
A list of common problems and their remedies for troubleshooting.
Troubleshooting engine knocking, charging faults, and battery overheating.
Diagnosing and resolving issues like clutch slip and faulty brakes.
Detailed procedure for starting the engine, covering cold and warm conditions.
Procedure for stopping the engine normally and in emergency situations.
Procedure for checking and topping up engine oil, including safety warnings.
Steps for draining oil, replacing filters, and safety precautions.
Instructions for checking the engine coolant level in radiator and expansion tank.
Procedure to check and adjust the throttle cable free play.
Guide to checking, cleaning, and replacing spark plugs, including heat rating indicators.
Steps to adjust the engine's idle speed using the carburettor screw.
Procedure for checking and cleaning the air filter, with a note on washability.
Procedure for checking front brake fluid level, with handling cautions.
How to adjust rear brake pedal position and free play, with associated warnings.
Steps to check rear brake fluid level, including safety and handling precautions.
Procedure to adjust the clutch control lever cable tension.
Procedure to adjust the starter lever free play.
Information on standard suspension settings and warnings about modifications.
How to adjust rear shock absorber setting for rider and passenger.
Detailed steps to adjust rear shock absorber spring preload with safety notes.
Procedure for checking and adjusting the drive chain slack.
Instructions for lubricating the drive chain, washing, and component checks.
Procedure for removing and correctly reassembling the front wheel.
Procedure for removing and correctly reassembling the rear wheel.
Information on tyre care, correct inflation pressure, and wear limits.
Overview of the key components of the front and rear braking systems.
Instructions for periodic checks of the braking system, including hose inspection.
Location of ignition system components like generator, coil, and starter motor.
Location of battery, flasher, relays, fan, fuse, and sensors.
Information on battery maintenance, charging cycles, and storage guidelines.
Instructions for connecting and using a battery charger, with safety warnings.
Procedure for replacing headlamp and parking light bulbs, with handling notes.
Procedures for replacing the tail light and number plate bulbs.
Procedure for checking and adjusting the headlight beam height and aim.
List of included equipment, tools, and accessories provided with the motorcycle.
Guidelines for preparing the motorcycle for long-term storage.
Procedures for cleaning the motorcycle and important safety warnings.
Checklist for pre-delivery inspections of engine, chassis, and electrical systems.
Schedule of periodic maintenance tasks for engine components at various intervals.
Schedule of periodic maintenance tasks for chassis components at various intervals.
