To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna TC 250 2011 and is the answer not in the manual?
General| Displacement | 249cc |
|---|---|
| Starter | Kick |
| Transmission | 6-speed |
| Final Drive | Chain |
| Front Tire | 80/100-21 |
| Frame | Chromium-molybdenum steel |
| Rear Suspension | Monoshock |
| Front Brake | Disc brake, 260 mm |
| Rear Brake | Disc |
| Bore x Stroke | 66.4 x 72 mm |
Key information and warnings regarding model configurations and maintenance.
Explains the meaning of warning, caution, and note statements.
Safety warnings related to children and motorcycle parking.
Instructions on locating and using the frame number for identification.
Details about the 17-digit VIN and its stamping location.
Illustration and numbering of controls on the left side of the motorcycle.
Illustration and numbering of controls on the right side of the motorcycle.
Technical specifications for the engine, including type, cooling, bore, stroke, displacement, and compression.
Technical data for the transmission, including ratios and type.
Table detailing lubrication points, oil types, and fluid capacities.
Instructions for operating the fuel cock on TE-TXCi models.
Information about the fuel pump and fuel level indication for fuel-injected models.
Recommendations for fuel type and warnings about engine pinging or knocking.
Explanation of the double map button for adjusting motorcycle performance.
Overview of available functions and how to select them using the SCROLL knob.
Action to take in case of fuel injection system malfunction.
Details on the TRIP 1 function for measuring distance.
Information on the Chrono function for measuring time.
Description of warning lights on the TXCi model.
Instructions for adjusting the hydraulic clutch control lever.
Procedure for locking and unlocking the steering on TE models.
Controls for the left-hand handlebar commutator on TE models.
Location and function of the engine stop button on TC models.
Instructions for operating the gear shift lever and finding neutral.
Pre-ride inspection checklist to ensure safety and prevent failures.
Guidelines for the initial running-in period of the motorcycle.
Warnings and instructions for using the kick start pedal.
Recommendations for starting the engine in cold conditions.
Guidance on starting the engine in cold weather.
Safety advice on using brakes and engine stop button during malfunctions.
Procedures for engine oil and filter maintenance.
Safety warning about removing a hot radiator cap.
Periodic check of coolant hoses for cracks and tightening of clamps.
Notes regarding throttle cable replacement and measurements.
Advice on selecting spark plugs with appropriate heat ranges.
Procedure for cleaning and washing the air filter element.
Instructions for reassembling the air filter housing and related parts.
Steps for cleaning and maintaining the air filter element.
Guidance on correctly reassembling the air filter system.
How to adjust the steering lock mechanism.
Warning about spongy brake levers and the need for immediate checks.
Cautions regarding brake fluid handling and mixing.
Procedure to adjust the rear brake pedal's idle stroke.
Steps to adjust the clutch lever position and free play.
Notes on checking oil level and adjusting suspension units.
How to adjust the fork's compression damping.
How to adjust the fork's extension damping.
Procedure to check and adjust the oil level in the fork legs.
Steps to adjust the rear shock absorber spring preload.
Standard calibration for low and high damping speed compression.
Standard calibration for extension damping.
Procedure for adjusting the chain tension.
Instructions for lubricating the drive chain.
Procedures for washing motorcycle chains with and without OR seals.
Lubrication methods for motorcycle chains with and without OR seals.
Important notes regarding front brake operation and wheel placement after removal.
Note on pumping the brake control lever after front wheel reassembly.
Notes on rear brake operation and pedal action after rear wheel removal.
Overview of major brake system components.
How to inspect brake pads for wear and service limits.
Instructions for installing new brake pads.
Information about the sealed battery, its maintenance, and storage.
Instructions for using a battery charger and connecting it properly.
Warnings about sulfuric acid and explosive gases during charging.
Information that the tail light is an LED light.
Post-race inspection and maintenance procedures.
Important recommendations for washing the motorcycle.
