Need help?Do you have a question about the Husqvarna TS 148XK and is the answer not in the manual?
General| Brand | Husqvarna |
|---|---|
| Model | TS 148XK |
| Category | Lawn Mower |
| Language | English |
Identifies key control elements like levers, pedals, and switches.
Explains warning, caution, and manual reference symbols on the product.
Details symbols for entanglement, CO, thrown objects, hot surfaces, and deck requirements.
Explains how to read and reset the hour meter and its functionality.
Outlines conditions under which the manufacturer is not liable for damages.
Defines warning, caution, and note terminology used in the manual.
Outlines specific safety rules for children around the mower.
Provides essential safety guidelines for operating the machine.
Recommends appropriate PPE for safe operation of the product.
Details checks for the product's safety devices, especially OPC.
How to verify the correct function of the reverse operation system.
Procedures for checking brake function and maintenance needs.
Covers muffler checks and warnings about its hot surface.
Provides safety guidelines and techniques for mowing on slopes.
Critical precautions for handling flammable fuel to prevent fire and explosion.
Guidelines for safe handling and charging of the product's battery.
Instructions for safely transporting the product.
General safety rules to follow before performing maintenance.
Steps for safely unpacking the product from its packaging.
Lists the tools needed for product assembly.
Lists parts that require assembly after unpacking.
Instructions for fitting the lower engine cover.
Guide on how to adjust the seat for optimal operator comfort.
Step-by-step instructions for connecting the battery terminals safely.
Procedure to safely remove the tractor from its shipping skid.
Ensures all parts are installed and checked after assembly.
Instructions for safely adding fuel to the product.
Steps to take before turning the ignition key to start.
Procedure for starting the engine when it is already warm.
Procedure for starting the engine from a cold state.
How to use jumper cables to start the engine with a weak battery.
Steps for safely disconnecting jumper cables after starting.
How to position the cutting deck for transport or mowing.
Guide on setting the desired cutting height.
How to control the product's movement using the pedals.
Instructions for engaging and disengaging the parking brake.
Procedure for safely stopping the engine and the product.
How the throttle control affects engine and blade speed.
How to engage and use the cruise control for consistent speed.
Instructions for turning on and off the product's headlights.
How to use ROS for reverse mowing with the deck engaged.
Steps to control the cutting deck operation.
Tips for optimal grass cutting performance.
How to put the product in freewheel for non-engine movement.
Guide to installing the mulch plug accessory.
Instructions for fitting the rear discharge deflector.
Steps for attaching the grass catcher accessory.
Schedule of regular checks for the product itself.
Schedule of regular checks and replacements for the engine.
Guidance on lubricating pivot points and bearings.
How to clean the tractor's surfaces and components.
Instructions for cleaning the cutting deck using the washout port.
Steps for replacing a burnt-out headlight bulb.
Procedures for checking tire pressure and repairing tires.
How to inspect V-belts for wear and damage.
How to maintain the cooling fan for the transaxle.
Steps to remove and reinstall the engine cover and grill.
Instructions for replacing the drive belt for the cutting deck.
How to clean corrosion and dirt from the battery and its terminals.
Step-by-step guide for replacing the product's battery.
Procedures for safely connecting jumper cables for starting.
Procedures for safely disconnecting jumper cables.
Detailed steps for detaching and reattaching the cutting deck.
How to adjust the cutting deck for level mowing.
Method for visually checking and adjusting deck side-level.
How to set the correct front-to-rear cutting deck angle.
Instructions for safely replacing the cutting blades.
Steps to remove the cutting blades from the deck.
How to install the drive belt correctly onto pulleys.
How to adjust anti-scalp rollers for proper deck function.
Information on selecting and using engine oil.
Procedure to check and maintain the correct engine oil level.
Steps for draining and refilling the engine oil.
Instructions for replacing the engine oil filter.
How to clean the air filter and air screen for optimal engine performance.
Maintaining the engine's cooling system for proper operation.
Steps for replacing spark plugs for engine ignition.
How to replace the fuel filter to ensure fuel flow.
Procedure to remove air from the transmission before operation.
Troubleshooting steps when the engine fails to start.
Diagnosing and resolving issues with rough engine operation.
Troubleshooting steps for an engine that becomes too hot.
Diagnosing and fixing issues causing loss of engine power.
Identifying and resolving causes of vibration in the product.
Troubleshooting why the battery is not charging.
Diagnosing problems with the operator presence control system.
Troubleshooting why the cutting blades cannot rotate.
Diagnosing and fixing issues with grass discharge.
Troubleshooting steps for non-functioning headlights.
Diagnosing issues causing slow or erratic product movement.
Troubleshooting poor cutting performance.
Diagnosing why the engine stops or backfires.
Guidelines for safely securing and moving the product during transport.
Precautions and rules for towing the product.
Steps to prepare the product for long-term storage.
How to properly dispose of the product and its components.
Detailed technical data for the engine.
Key specifications for the tractor, tires, and electrical system.
Advice on when to get the product serviced by a professional.
To Next Page