EasyManua.ls Logo

Husqvarna TS 146XKD - User Manual

Husqvarna TS 146XKD
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
English/Spanish
114 26 22-49
Operator’s Manual
Manual de Operario
TS 146XKD
Gasoline containing up to 10% ethanol (E10) is accept-
able for use in this machine. The use of any gasoline ex-
ceeding 10% ethanol (E10) will void the product warranty.
Esta máquina puede utilizar gasolina con un con-
tenido de hasta el 10% de etanol (E10). El uso de una
gasolina que supere el 10% de etanol (E10) anulará la
garantía del producto.
Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.
Por favor lea cuidadosamente y comprenda
estas intrucciones antes de usar esta maquina.

Questions and Answers

  • M
    Margaret AlexanderAug 20, 2025
    Why won't my Husqvarna TS 146XKD Lawn Mower start?
    • J
      John SandersAug 20, 2025
      If your Husqvarna Lawn Mower won't start, it could be due to several reasons. First, ensure the fuel tank is filled. If the engine is flooded, wait a few minutes before trying again. Other potential causes include a bad spark plug (replace it), a dirty air filter (clean or replace it), a dirty fuel filter (replace it), or water in the fuel (empty the tank and carburetor, refill with fresh gasoline, and replace the fuel filter). Also, check for loose or damaged wiring. If none of these steps work, the engine valves might be out of adjustment, and you should contact an authorized service center.
  • M
    Marcus MarksAug 22, 2025
    How to fix a Husqvarna TS 146XKD that is hard to start?
    • K
      Kimberly ChavezAug 22, 2025
      If your Husqvarna Lawn Mower is hard to start, try these solutions: * Clean or replace the air filter. * Replace the spark plug. * Recharge or replace the battery if it's weak or dead. * Replace the fuel filter if it's dirty. * Empty the fuel tank and refill it with fresh, clean gas if the fuel is stale or dirty. * Check all wiring for any loose or damaged connections. If the problem persists, the engine valves may be out of adjustment, requiring assistance from an authorized service center.
  • A
    Anna ColemanAug 25, 2025
    Why Husqvarna TS 146XKD engine will not turn over?
    • J
      Johnny MartinAug 25, 2025
      If your Husqvarna Lawn Mower engine will not turn over, make sure the brake pedal is depressed and the attachment clutch is disengaged. Check the battery; recharge or replace it if it's weak or dead. Also, check for a blown fuse (replace it), corroded battery terminals (clean them), or loose or damaged wiring (check all wiring). If these steps don't resolve the issue, the ignition switch or the solenoid/starter might be faulty, requiring a check or replacement. If the problem persists, the operator presence switch(es) might be faulty, and you should contact an authorized service center.
  • K
    Kelsey DicksonAug 28, 2025
    How to fix a poor and uneven cut from my Husqvarna Lawn Mower?
    • J
      Jessica DeanAug 28, 2025
      If your Husqvarna Lawn Mower provides a poor cut that is uneven, you should replace the blade and tighten the blade bolt if the blade is worn, bent or loose. Level the mower deck. Clean the underside of the mower housing to remove any buildup of grass, leaves, or trash. Replace the blade mandrel if it is bent. Clean around mandrels to open vent holes if clogged.
  • W
    William MonroeAug 30, 2025
    Why will my Husqvarna TS 146XKD battery not charge?
    • T
      Thomas HernandezAug 30, 2025
      If your Husqvarna Lawn Mower battery will not charge, replace the battery if it has bad cells. Check and clean all connections if there are poor cable connections. Replace the regulator if it is faulty (if equipped). Replace the alternator if it is faulty.
  • M
    melissa32Sep 1, 2025
    How to stop Husqvarna TS 146XKD engine from backfiring when turning engine off?
    • L
      Leslie YoungSep 1, 2025
      To prevent your Husqvarna Lawn Mower engine from backfiring when turning it off, move the throttle control between half and full speed (fast) position before stopping the engine.
  • C
    chenjenniferSep 2, 2025
    What to do if my Husqvarna TS 146XKD Lawn Mower engine clicks but will not start?
    • D
      Diane AriasSep 3, 2025
      If your Husqvarna Lawn Mower engine clicks but won't start, the issue might be a weak or dead battery (recharge or replace it), corroded battery terminals (clean them), loose or damaged wiring (check all wiring), or a faulty solenoid or starter (check/replace the solenoid or starter).
  • A
    Allen JohnsonSep 5, 2025
    How to stop excessive vibration in my Husqvarna TS 146XKD Lawn Mower?
    • D
      Donna DoyleSep 5, 2025
      If your Husqvarna Lawn Mower has excessive vibration, the cause might be a worn, bent, or loose blade (replace the blade and tighten the blade bolt), a bent blade mandrel (replace the blade mandrel), or loose/damaged parts (tighten loose parts and replace damaged parts).
  • J
    James SmithSep 7, 2025
    Why Husqvarna TS 146XKD blades will not rotate?
    • F
      fcharlesSep 7, 2025
      If your Husqvarna Lawn Mower blades will not rotate, it could be due to an obstruction in the clutch mechanism (remove the obstruction), a worn or damaged mower drive belt (replace the mower drive belt), a frozen idler pulley (replace the idler pulley), or a frozen blade mandrel (replace the blade mandrel).
  • K
    Krista GrahamSep 9, 2025
    Why does my Husqvarna Lawn Mower have poor grass discharge?
    • K
      Katie ThompsonSep 9, 2025
      If your Husqvarna Lawn Mower has poor grass discharge, ensure the engine speed is set to the “FAST” position using the throttle control. Shift to a slower speed if your travel speed is too fast. Allow the grass to dry before mowing if it is wet. Level the mower deck if it is not level. Check the tires for proper air pressure. Replace the blade and tighten the blade bolt if the blade is worn, bent, or loose. Clean the underside of the mower housing to remove buildup. Replace the mower drive belt if it is worn. Reinstall the blades with the sharp edge down if they are improperly installed. Replace with blades listed in the parts manual if improper blades are used. Clean around the mandrels to open vent holes if they are clogged.

Husqvarna TS 146XKD Specifications

General IconGeneral
Cutting Width46 inches
TransmissionHydrostatic
Deck MaterialSteel
Cutting Height AdjustmentLever
Warranty3 years
Fuel Tank Capacity3.5 gallons
Blade EngagementElectric
Turning Radius16 inch
Seat TypeHigh-back
Cylinder Displacement725 cc

Related product manuals