To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna TS 142TX and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Engine Type | Intek |
| Cylinders | 2 |
| Fuel Type | Gasoline |
| Transmission Type | Hydrostatic |
| Cutting Width | 42 inches |
| Cutting Height, min | 1.5 inches |
| Cutting Height, max | 4 inches |
| Deck Material | Steel |
| Speed Range | 0-5.5 mph |
| Warranty | 3 years |
| Blade Engagement | Electric |
| Tire Size, front | 15x6-6 |
| Tire Size, rear | 20x10-8 |
Primary English title for the user guide, emphasizing careful reading before use.
Operator training and understanding of controls and proper use of the equipment.
Pre-operation checks and safety guidelines to reduce fire risk and ensure safe use.
Safe operating procedures, including slope limits and general use precautions.
Guidelines for maintaining the equipment and proper storage procedures.
Details engine power output (hp/kw) and operational speed (km/h).
Specifies machine dimensions (cm) and weight (kg).
Lists EU directives and harmonized standards for machinery, EMC, and noise.
Lists applied technical standards and notified body information.
Details for model, catalogue number, PNC, and serial number.
Symbols for gear selection (REVERSE, NEUTRAL, HIGH, LOW) and speed control (FAST, SLOW).
Symbols indicating engine status: STOP, ENGINE OFF, ENGINE ON, ENGINE START.
Symbols for lights (LIGHTS ON) and ignition (IGNITION).
Symbols indicating parking brake status: PARKING BRAKE, UNLOCKED, LOCKED.
Symbol indicating the position for cold weather starting.
Symbols for fuel level (FUEL) and oil pressure (OIL PRESSURE).
Symbols indicating driving direction: REVERSE and FORWARD.
Symbol for adjusting the cutting height of the mower.
Symbols indicating attachment clutch engagement status.
Symbols indicating caution, danger, and general warnings.
Symbol indicating that surfaces may be hot.
Symbol providing information on drawbar loading.
Symbol representing the brake and clutch pedal.
Symbol indicating the sound power level of the machine.
Symbol recommending the use of hearing protection.
Lists parts that need assembly before the tractor can be used.
Instructions for adjusting the operator's seat for proper positioning.
Identifies and locates all controls on the tractor's operator station.
Description of the light switch and engine speed regulation.
Controls for braking the tractor and managing forward/reverse movement.
Controls for engaging/disengaging the cutting unit and adjusting its height.
Controls engine start, electrical systems, and Reverse Operation System (ROS).
Instructions on how to engage and disengage the parking brake.
Lever for towing and indicator for service intervals.
Instructions for safely adding fuel to the tractor's tank.
Procedure for checking and filling the engine oil to the correct level.
Importance of checking tire pressure for proper lawn appearance.
Procedure for starting the engine using the Ready-Start system.
Steps for starting the engine in normal temperature conditions.
Procedure for starting the engine in cold weather conditions.
Procedure to remove air from the transmission for optimal performance.
How to control tractor movement using drive pedals.
Instructions for operating the cutting unit and choosing the right speed.
Explanation of the ROS system and its safety features.
Advice for optimal cutting results, including grass conditions and speed.
Warning regarding the risks associated with operating on slopes.
Technique for cutting close to trees, bushes, and paths.
Procedure for safely stopping the engine.
Safety precautions before performing maintenance or repairs.
Daily maintenance checks required before operating the tractor.
General cleaning instructions and precautions.
Specific instructions for cleaning the steering plate.
Procedure for changing the engine oil.
Instructions for accessing engine components by opening the hood.
Detailed steps for changing the engine oil.
Steps to remove the lower dash cover for oil change access.
Instructions on how to operate the oil drain valve.
Log for recording dates of completed maintenance activities.
Maintenance schedule outlining tasks based on time or usage.
Instructions for cleaning the air screen to prevent engine damage.
Importance of maintaining the air filter for proper engine operation.
Explanation of safety systems and how they function.
Information on blade maintenance, sharpening, and replacement.
Procedure for safely removing the mower deck from the tractor.
Steps required to assemble the cutting unit onto the tractor.
Steps detailing the removal of the mower drive belt.
Steps detailing the installation of the mower drive belt.
Instructions for ensuring the mower deck is level side-to-side.
Basic procedure for adjusting mower side-to-side level.
Detailed procedure for precise side-to-side mower leveling.
Procedure for adjusting the mower deck level from front to back.
Procedure for checking the tractor's brake function.
Guidelines for maintaining the transaxle cooling system.
Explanation of the service minder system and its functions.
Instructions for using the deck washout port for cleaning.
Common problems and solutions for the engine not starting.
Troubleshooting for uneven engine operation or lack of power.
Problems related to the battery charging or lighting system.
Diagnosing and resolving machine vibration or uneven cutting.
Causes for uneven cutting, such as blunt blades or incorrect setup.
Steps to prepare the machine for storage after the mowing season.
Provides a description of the product and its compliance.
Lists the EU directives and regulations the product complies with.
