Need help?Do you have a question about the Husqvarna TS 73 R and is the answer not in the manual?
General| Max. cutting depth | 73 mm |
|---|---|
| Max. cutting length | 730 mm |
| Blade Bore | 25.4 mm |
| Cutting Depth | 73 mm |
| Blade Type | Diamond blade |
Defines obligation, warning, prohibition, and information symbols.
Covers disc type, personnel, markings, modifications, maintenance, and parts.
Covers speed, protection, cut depth/length, dimensions, weight, cooling, and supply.
Details securing the head and adjusting leg flywheels for transport and reinstallation.
Covers workspace clearance, operator gear, ear protection, and personnel evacuation.
Ensure blade speed compatibility and keep blade guard in place.
Covers power disconnect, guard removal, nut unscrewing, disc placement, and refitting.
Includes left-hand thread nut, rotation direction, and clean contact faces.
Emphasizes circuit-breaker use, RCCB testing, and voltage verification.
Details engine specs, approved plugs, and extension lead sizing.
Covers balanced position, tool clearance, guard, and wet cutting prep.
Details starting (green button) and stopping (red button) the machine.
Covers square cuts, 45-degree bevel cuts, and head-down cutting.
Covers factory adjustments and specific screw adjustments for squaring and handling.
Includes daily cleaning, tank/pump care, rail cleaning, and storage.
Always disconnect power before performing any maintenance operation.
Addresses machine not working, difficult starting, pump failures, and no water flow.
Details slide adjustment, roller-rail play elimination, and rail rotation.
Position the extension left or right for stability when cutting large materials.
Covers tightening fasteners, water supply, blade security, and clean contact surfaces.
Warns about noise levels exceeding 85 dB(A) and the need for hearing protection.
Recommends supplier service for repairs and provides advice for ordering spare parts.
Details legislative disposal requirements and lists main machine materials.
To Next Page