Need help?Do you have a question about the Husqvarna Tuff Torq K61 and is the answer not in the manual?
Procedure for draining the oil from the transaxle.
Steps for removing the differential gear assembly.
Details on removing axle shafts and differential gear assemblies.
Procedure for removing the center case and motor shaft assembly.
How to remove the cylinder block (motor) assembly.
Procedure for removing the motor shaft.
How to remove the cylinder block assembly (pump).
Steps for removing the swash plate assembly.
Steps for removing the pump shaft.
Steps for assembling the pump shaft.
Procedure for assembling the swash plate.
Steps for assembling the cylinder block (pump).
Procedure for assembling the motor shaft.
Instructions for assembling the center case.
Procedure for assembling the motor shaft and center case.
Steps for assembling the differential gear assembly.
Steps to purge air from the hydrostatic oil circuit.
Procedure for adjusting the neutral position of the transaxle.
Diagnosing and resolving issues causing no drive.
General| Cooling System | Air-cooled |
|---|---|
| Fuel System | Carburetor |
| Ignition System | Electronic |
| Fuel Type | Gasoline |
| Starting System | Electric |
To Next Page
