Why is my Husqvarna Viking Designer Sapphire 85 skipping stitches?
If your Husqvarna Sewing Machine is skipping stitches, consider these solutions: * Ensure the needle is correctly inserted. * Use needle system 130/705 H, and make sure the needle is suitable for the selected fabric and thread. * Try inserting a new needle. * Remove the thread completely and rethread the machine.
Why does the needle thread keep breaking on my Husqvarna Viking Designer Sapphire 85 Sewing Machine?
If the needle thread breaks on your Husqvarna Sewing Machine, try the following: * Ensure the needle is correctly inserted. * Use needle system 130/705 H, selecting a needle suitable for your fabric and thread. * Insert a new needle. * Completely remove and rethread the machine. * Change the needle to the proper size for the thread. * Use a new, high-quality thread from an authorized HUSQVARNA® VIKING® retailer. * Try a different spool pin position (vertical or horizontal). * Change the needle plate. * Lower the thread tension in small increments until the issue is resolved.
What to do if my Husqvarna Viking Designer Sapphire 85 will not embroider?
If your Husqvarna Sewing Machine won't embroider, make sure that the embroidery unit is properly attached to the socket and the correct hoop is properly slid on.
Why is my Husqvarna Viking Designer Sapphire 85 Sewing Machine not feeding fabric properly?
If your Husqvarna Sewing Machine does not feed or feeds irregularly: * Remove the thread completely and rethread the machine. * Remove the needle plate and clean the feed teeth with a brush. * Turn off the free motion setting in sewing mode. * Ensure the feed teeth are not set to the down position in the settings menu. * Attach the correct presser foot.
Why does the bobbin thread keep breaking on my Husqvarna Sewing Machine?
If the bobbin thread breaks on your Husqvarna Sewing Machine, try the following: * Use only original bobbins approved for your model. * Check the bobbin thread. * Change the needle plate. * Clean lint from the bobbin area and use only original bobbins approved for the model. * Wind a new bobbin.
Why does the seam on my Husqvarna Viking Designer Sapphire 85 have uneven stitches?
If the seam has uneven stitches on your Husqvarna Sewing Machine, check the needle thread tension. Remove the thread completely and rethread the machine. Also, change the thread, check the bobbin winding, and ensure a proper needle is correctly inserted that is suitable for the selected fabric.
Why are thread loops forming on the underside of my Husqvarna Viking Designer Sapphire 85 Sewing Machine embroidery?
If thread loops are forming on the underside of your embroidery design with your Husqvarna Sewing Machine, attach the Sensor Q-Foot. If you're using the R-Foot, increase the embroidery pivot height in the settings menu in small increments until the problem is solved.
Why does the needle keep breaking on my Husqvarna Viking Designer Sapphire 85?
To address a broken needle on your Husqvarna Sewing Machine, correctly insert the needle. Use a needle suitable for the selected fabric.
What to do if fabric does not feed through my Husqvarna Viking Designer Sapphire 85?
If the fabric does not feed through your Husqvarna Sewing Machine, ensure the machine is not set for free motion sewing and that the feed teeth are not set to the down position in the settings menu.
How to fix a distorted embroidery design on my Husqvarna Viking Designer Sapphire 85?
If the embroidery design on your Husqvarna Sewing Machine is distorted, ensure the fabric is tightly hooped, using hoop clips for larger hoops. Hoop the fabric so the inner hoop matches the outer hoop exactly. Clear the area around the embroidery unit and ensure the hoop connector is fully inserted into the hoop attachment on the embroidery arm.
General| Brand | Husqvarna |
|---|---|
| Model | Viking Designer Sapphire 85 |
| Category | Sewing Machine |
| Language | English |
Explanation of various function buttons on the sewing machine and their uses.
Details spool pins, threads, needles, threading, and combinations.
Covers bobbin winding, insertion, and changing presser feet.
Instructions for attaching specialty feet, dual feed, guides, and changing the needle plate.
Solutions for general problems, skipped stitches, and uneven stitches.
To Next Page