EasyManua.ls Logo

Husqvarna W3213 User Manual

Husqvarna W3213
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operators manual
MANUAL NO. 539106471 REV. 03 (08/23/04)
Models:
968999114 / W3213
968999116 / W3613
968999251 / W4815
968999278 / WG4815P
Please read these instructions carefully and make
sure you understand them before using the machine.
Question and Answer IconNeed help?

Do you have a question about the Husqvarna W3213 and is the answer not in the manual?

Husqvarna W3213 Specifications

General IconGeneral
BrandHusqvarna
ModelW3213
CategoryLawn Mower
LanguageEnglish

Summary

Introduction

Technical Assistance and Support

Information on where to get help or locate a dealer for product assistance.

Safety Guidelines

Operator Training and Qualifications

Guidance on learning to use the mower and required operator qualifications.

Pre-Operation Preparation and Checks

Steps before operating, including PPE, area checks, and mower inspection.

Safe Operating Procedures

Guidelines for safe use on slopes, general operation, and stopping.

Maintenance for Safe Operation

Routine maintenance tasks to ensure the mower remains safe to operate.

Setup and Adjustments

Component Installation Procedures

Steps for mounting caster wheels, fuel tank, and handle assembly.

Linkage and Control System Setup

Procedures for installing traction linkages, throttle cable, and gas line.

Cutting Height and Axle Adjustment

Adjusting caster spacers and rear axle for desired cutting height.

Cutting Height Adjustment Chart

A chart detailing cutting height based on axle position and spacers.

Adjustments and Controls

Brake and Traction Lever Adjustment

Procedure for adjusting the brake and traction levers for proper function.

Safety Switch Adjustments

How to adjust operator presence and blade safety switches.

Drive Belt Tension Adjustment

Guidelines for setting drive belt tension and specific blade belt adjustments.

Transmission and Auxiliary Belt Adjustments

Procedures for adjusting transmission and auxiliary drive belts for optimal tension.

Blade Engagement Lever Adjustment

How to adjust the blade engagement lever for proper engagement and disengagement.

Operating Instructions

Pre-Operation Familiarization

Getting acquainted with controls, emergency stopping, and mower preparation.

Stopping Procedures

How to perform emergency and normal shutdown procedures correctly.

Pre-Start Checklist

Essential checks to perform before starting the mower for safe operation.

Engine Starting and Operation

Step-by-step guide for starting the engine and beginning forward motion.

Steering System Operation Guide

Explanation of how the mower's individual traction levers control steering.

Service and Maintenance

Service Assistance and Replacement Parts

Information on obtaining parts, service, and dealer assistance.

Safety System Checks and Cautions

Critical safety precautions and checks for interlock systems.

Cutting Deck and Blade Service

Procedures for cutting deck issues, blade sharpening, and balancing.

Cutter Housing Spindle Assemblies

Details on the cutter housing spindle assembly design and maintenance.

Belt Replacement and Winter Storage

Drive Belt Replacement Procedures

Step-by-step guide for replacing wheel, blade, transmission, and auxiliary belts.

Friction Washer and Winter Storage Prep

Maintenance for blade engagement friction washer and winter storage preparation.

Maintenance Schedule

Scheduled Maintenance Tasks and Frequency

A table outlining items, frequency, and required service for regular maintenance.

Related product manuals