EasyManua.ls Logo

Husqvarna W548 User Manual

Husqvarna W548
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
115 93 41-27 Rev A
Operator Manual
Manual del operador
Manuel d'utilisation
W548 / 967657701
W552 / 967657801
Please read the operator manual carefully and
make sure you understand the instructions
before using the machine.
Gasoline containing a maximum of
10% ethanol (E10) is permitted for use in this
machine. The use of gasoline with more than
10% ethanol (E10) will void the product warranty.
English
Spanish
French
Lea el manual de instrucciones detenidamente
y asegúrese de comprender las instrucciones
antes de utilizar la máquina.
Se permite usar gasolinas que contengan
un máximo de 10 % de etanol (E10) en esta
máquina. El uso de gasolina con más de 10 % de
etanol (E10) anulará la garantía del producto.
Lire attentivement le manuel de l'opérateur
et vous assurer de bien comprendre les
instructions avant d'utiliser la machine.
Il est possible d’utiliser de l’essence contenant
un maximum de 10 % d’éthanol (E10) avec
cette machine. L’utilisation d’essence contenant
plus de 10 % d’éthanol (E10) annulera la
garantie du produit.
Question and Answer IconNeed help?

Do you have a question about the Husqvarna W548 and is the answer not in the manual?

Husqvarna W548 Specifications

General IconGeneral
Cutting Width48 cm
Cutting Height AdjustmentCentral
Engine ManufacturerBriggs & Stratton
Cutting Height25-75 mm
Drive TypeSelf-propelled
Wheels4

Summary

General Safety Warnings and Precautions

Protecting Children and Safe Operation

Emphasizes child safety and general safe operating practices.

Symbols and Decals Explained

Understanding Warning Symbols

Interpretation of warning symbols indicating potential hazards.

Safety Instructions and Operation

Protecting Children During Operation

Crucial precautions to prevent harm to children near the mower.

General Operation Safety Guidelines

Best practices for safe operation, user responsibility, and awareness.

Safety Equipment and Environmental Hazards

Personal Protective Equipment (PPE)

Essential protective gear for safe operation.

Safe Slope Operation

Critical safety procedures for mowing on inclines.

Safe Gasoline Handling Practices

Guidelines for safely storing and using gasoline.

Safety in Maintenance and Battery Handling

Battery Safety and Servicing

Procedures for safe handling and maintenance of the battery.

Safety System Tests and Transport

Safety System Functionality Tests

How to test operator presence, blade, and park brake safety systems.

Machine Controls Overview

Key Control Identification

Labeled diagram identifying all operator controls on the machine.

Control Operation Details

Fuel Tank and Refueling Safety

Operation: Training and Starting

Operation: Running, Stopping, and Slopes

Mowing Tips and Slope Safety

Advice for optimal mowing and critical safety on slopes.

Maintenance Schedule

Scheduled Maintenance Intervals

Maintenance tasks based on operating hours or time.

Battery Maintenance and Replacement

Maintenance: Adjustments and Alignment

Cutting Height Adjustment

Adjusting Mower Deck Cutting Height

Step-by-step guide for setting the desired cutting height.

Blade Spacers and Deck Leveling

Mower Deck Leveling Procedure

Steps to ensure the mower deck is properly leveled for consistent cutting.

Deck Belt Maintenance

Cutting Blades Service

Blade Inspection and Replacement

Checking for bent blades and procedures for replacement.

Lubrication: General Guidelines

Lubrication Schedule and Points

A detailed table of lubrication points, intervals, and lubricant types.

Lubrication: Component Specifics

Troubleshooting Common Issues

Engine and Starting Problems

Solutions for engine not starting, running rough, or lacking power.

Movement and Deck Engagement Issues

Troubleshooting slow movement, deck engagement, and leaks.

Storage Procedures

Winter Storage Preparation

Detailed steps for preparing the machine for long-term winter storage.

Technical Specifications: W548

Technical Specifications: W552

Torque Specifications and Hardware

Service Journal: Scheduled Maintenance

Service Journal: Extended Intervals