Note: If the earmuffs are wet on the inner side,
let them dry in parking position. Refer to
To put the
earmuffs in parking position on page 7
.
4. Replace the membrane for the speech microphone if
it is damaged.
5. Replace the wind filter for the level dependent
microphone if it is damaged.
6. Replace the wind filter on the boom microphone if it
is damaged.
7. Replace the Comfort Pad of the headband if it is
necessary.
Transportation, storage and disposal
Transportation and storage
CAUTION: During transportation and
storage, put the earmuffs in operation
position to decrease wear on the plastic
material.
• Put the earmuffs in operation position. Refer to
To
put the earmuffs in operation position on page 6
.
• Make sure that the sealing rings are not
compressed.
• Put the product in a dry and clean space.
• Keep the product away from sunlight during storage.
• Charge the battery each 6 weeks to keep the quality
of the battery.
• Put the product in a safe space during
transportation.
Disposal
• Obey national regulations.
• Use the local recycling system.
• The product or package of the product is not
domestic waste. Recycle it at a recycling station for
electrical and electronic equipment.
Accessories
Approved helmets
Use the product with the helmets below only.
Model Helmet attachment type Adapter graphic Approved dimensions
Husqvarna Technical,
H300
Adapter H300 M/L
Husqvarna Spire Adapter Spire L
KASK Zenith X
10 2146 - 003 -
To Next Page
Loading...