Husqvarna YTH1746B - Page 43

REPAIR PARTS
TRACTOR - MODEL NO. YTH1746 (YTH1746B), PRODUCT NO. 954 56 70-55
MOWER DECK
KEY PART
NO. NO.
1 532177083
3 532138457
5 532124670
6 532130832
8 532850857
9 810030600
10 532140296
11 532176084
532152443
13 532137553
14 532137152
15 532110485
16 532174493
18 872140505
19 532132827
20 532145055
21 873680500
22 532176929
23 532176927
24 532105304
25 532149287
26 532110452
27 532171384
28 819111016
29 532131491
30 532157722
31 532129963
32 532173434
33 532137266
34 532177086
35 817490628
36 819131316
37 532173438
38 532173900
39 532173899
40 532137273
41 817060620
42 532122052
DESCRIPTION
KEY
NO.
Deck Weldment Mower HD 46 WAD 43
Bracket Asm., Sway Bar 44
Retainer Spring 45
Arm, Suspension, Rear (Sway Bar) 46
Bolt, Patched 3/8-24 x 1-1/4 Gr. 8 47
Washer, Lock Hvy., Unplated 3/8 48
Washer, Hard Blade, MowerVented 49
Blade, 46" High Performance 50
Blade, 46" Mulching 52
Shaft Asm. w/Lower Bearing 56
(Includes Key No. 12) 57
Housing, Mandrel 72
Bearing, Ball, Mandrel 90
Stripper, Mower Round 91
Bolt, Carriage 5/16-18 x 5/8 92
Bolt, Hex Head, Shoulder 5/16-18 93
Baffle, Vortex Mower 46" 94
Nut, Crownlock 5/16-18 UNC 95
Stiffener, Bracket 101
Bracket, Deflector 102
Cap, Sleeve 103
Spring, Torsion, Deflector 104
Nut, Push 105
Shield, Deflector Mower 106
Washer 11/32 x 5/8 x 16 Ga. 116
Rod, Hinge 117
Screw, Thdroll, Washer Head 118
Washer, Spacer Mower Vented 119
Pulley, Mandrel 126
Nut, Fig. Top Lock Cntr. 9/16 127
Anchor, Spring Deck 46" - -
Screw, Thdroll 3/8-16 x 1-3/4 Tytt
Washer 13/32 x 13/16 x 16 Ga. --
Pulley, Idler, Flat
Keeper, Belt, Idler
Pulley, Idler, Driven
Spring, Secondary 44/46/50 Vent
Screw, Thdroll 3/8-16 x 1-1/4
Spacer, Retainer
NOTE:
PART
NO.
532177085
532133943
532145059
532137729
532144959
532148763
873680600
872110612
532173901
532155986
532156941
819131616
874780516
532175746
873800500
819171416
532132264
532175747
532145579
871081010
810071000
819061216
532160793
532125004
532137644
532133957
873930600
819121414
532177084
532173902
532143651
532176549
DESCRIPTION
Arm, Idler Secondary
Washer, Hardened
Cover, Mandrel Deck
Screw, Thdroll. 1/4-20 x 5/8
V-Belt, Mower, Secondary
V-Belt, Mower, Primary
Nut, Crownlock 3/8-16 UNC
Bolt, Carriage 3/8-16 x 1-1/2 Gr. 5
Pulley Idler Flat 46 Pri. Drive
Bar Pnt Adjusting Wheel Gauge
Pin Head Rivet
Washer 13/32 x 1 x 16 Ga.
Bolt, Hex 5/16 x 18 x 1
Bracket, Asm Noseroller, LH
Nut, Lock, Hex 5/16-18
Washer 17/32 x 7/8 x 16 Ga.
Roller, Nose 38 & 42
Bracket, asm Noseroller RH
Cover, Mulching
Screw
Washer, Lock #10
Washer
Latch Asm. Bagger
Nut, Weld
Bolt, Shoulder
Gauge Wheel
Nut, Centerlock 3/8-16 UNC
Washer 3/8 x 7/8 x 14 Ga.
Arm, Idler, Primary Deck 46"
Pulley, Idler, V-Groove Dim. 4.25
Mandrel Assembly ( Includes Key
Nos. 8-10, 12-15, 31 and 33)
Mower Serv 46" (Standard Deck
Order nose roller, guage wheels, and
mulching plate components
separately Key Nos. 90-95,116-118,
101-106)
All component dimensions given in U.S. inches
1 inch = 25.4 mm
43