Husqvarna YTH2448 - Mower Deck

REPAIR PARTS
TRACTOR - MODEL NO. YTH2448 (96015000103), PRODUCT NO. 960 15 00-01
MOWER DECK
KEY PART
NO. NO.
1 532 18 03-58
3 532 13 80-t7
5 532 12 46-70
6 532 17 80-24
8 532 17 43-65
11 532 18 00-54
13 532 17 43-60
14 532 17 43-58
15 532 11 04-85
16 532 17 44-93
17 872 11 06-10
18 872 14 05-05
19 532 13 28-27
20 532 17 43-78
21 873 68 05-00
24 532 10 53-04
25 532 17 8t-02
26 532 11 04-52
27 532 18 17-07
28 819 11 10-16
29 532 13 14-91
30 532 17 39-84
3t 532 18 76-90
32 532 17 34-36
33 532 17 83-42
37 532 17 79-68
39 532 17 43-75
42 532 12 20-52
43 532 17 43-73
45 532 18 08-06
46 532 13 77-29
47 532 18 08-08
48 532 17 43-68
49 873 90 06-00
50 872 11 06-12
52 532 17 58-20
54 874 78 06-16
DESCRIPTION
KEY PART
NO. NO.
Deck Weldment Mower 48 55 872 14
Bracket Asm., Sway Bar 56 532 15
Retainer Spring 57 532 15
Bar Sway Deck 72 819 13
Bolt, 7/16 Asm. Blade 91 532 18
Blade 92 873 80
Shaft Asm. Mandrel Sealed 94 532 17
Housing Mandrel 48" 95 532 18
Bearing, Ball, Mandrel 97 532 17
Stripper, Mower 98 532 17
Bolt Rdhd Sq Neck 3/8-16 x 1.25 99 532 18
Bolt, Carriage 5/16-18 x 5/8 100 872 11
Bolt, Hex Head, Shoulder 5/16-18 110 532 17
Baffle, Vortex Mower 11t 532 17
Nut, Crownlock 5/16-18 unc 116 532 18
Cap, Sleeve 117 532 17
Spring, Torsion 118 873 93
Nut, Push 119 819 12
Shield, Deflector Mower 12t 532 17
Washer 11/32x5/8x16Ga. 126 53217
Rod, Hinge 130 817 00
Screw, Thdroll, Washer Head 131 819 13
Washer, Spacer Mower Vented 132 817 00
Pulley, Mandrel 133 872 11
Nut, FIg. Top Lock Cntr. 9/16 182 532 17
Pulley, Idler, Flat 183 532 16
Pulley, Idler, Driven 184 532 17
Spacer, Retainer -- 532 17
Arm, Idler Secondary
Cover, Mandrel Deck
Screw, Thdroll. 1/4-20 x 5/8 - - 532 18
V-Belt, Mower, Secondary
V-Belt, Mower, Primary
Nut, Lock 3/8-16 unc
Bolt, Carriage 3/8-16 x 1-1/2 Gr. 5
Pulley Idler Flat 46 Pri. Drive
Bolt Fin Hex 3/8-16 x 1
DESCRIPTION
06-08 Bolt Rdhd Sqnk 3/8-t6 x 1
59-86 Bar Pnt Adjusting Wheel Gauge
69-4t Pin Head Rivet
13-12 Washer 13/32 x 13/16 x 12
05-35 Bracket, Asm Noseroller, RH 48
06-00 Nut Lock Hex w/Ins 3/8-16
60-66 Roller, Nose 48"
05-34 Bracket, Asm Noseroller LH 48
85-15 Washer Hardened
94-79 Spring Primary Drive
99-93 Pulley Idler "V"
06-16 Bolt RDHD Sqnk 3/8-t6 unc x 2
50-16 Arm Spring Secondary
46-10 Arm Spring Fixed Tension
42-19 Bolt, Shoulder
48-73 Gauge Wheel
06-00 Nut, Centerlock 3/8-16 unc
14-14 Washer 3/8 x 7/8 x 14 Ga.
43-71 Spring Secondary Drive
43-72 Arm, Idler, Primary Deck
06-t6 Screw 3/8-16 x 1.0
16-06 Washer 13/32 x 1 x 6 Ga.
06-12 Screw 3/8-16 x 3/4
05-06 Bolt Rdhd Sqnk 5/16-18 unc x 3/4
91-27 Rod Roller Nose
35-52 Retainer Spring
39-79 Keeper Belt Idler
43-57 Mandrel Assembly (Includes Hous-
ing, Shaft and Shaft Hardware
Only-Pulley Not Included)
99-06 Replacement Mower, Complete
(Std Deck-Order Separately Nose
Roller Components Key Nos. 91,
94, 95, 132, 182-183)
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
45