To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna Z142 and is the answer not in the manual?
General| Cutting Width | 42 in |
|---|---|
| Cutting Height | 1.5 - 4 in |
| Transmission | Hydrostatic |
| Weight | 500 lbs |
| Deck Material | Steel |
| Warranty | 3 years |
| Fuel Capacity | 3 gallons |
Information on safely towing equipment behind the mower.
Guidelines for operating the mower safely and effectively.
Regulations and safety precautions for transporting the mower.
Information on Husqvarna service and support for products.
Location and details of the machine's manufacturing and engine numbers.
Explains the meaning of symbols and warnings in the manual.
Identifies common symbols used on the machine and in the manual.
Safety measures to keep children safe around the mower.
Key principles for safe operation of the mower.
Recommended protective gear for safe mower operation.
Guidance on safely operating the mower on inclines.
Precautions for safely refueling the mower.
Safety rules related to machine maintenance and operation.
Precautions for safely loading, unloading, and transporting the mower.
Warnings and precautions for handling the mower's battery.
Guidelines for towing with the mower.
Information on the spark arrestor and its use.
Identification of various control levers and their functions.
Detailed explanation of how steering levers control movement and turning.
Operation and adjustment of the integrated park brake system.
Function and location of the ignition switch for starting/stopping.
How to adjust engine speed for optimal performance.
Understanding the service meter for maintenance tracking.
Using the choke for cold engine starts.
Engaging and disengaging the mower deck blades.
Location and type of the primary fuse.
Operation of the fuel shut-off valve.
Adjusting the mower deck cutting height.
Engaging bypass linkages for manual movement.
How to adjust the operator's seat position.
Information on refueling and fuel type.
Adjusting the mower for straight tracking.
Initial training and familiarization with mower operation.
How to control movement and turning.
Specific instructions for turning right.
Specific instructions for turning left.
Detailed steps for performing a zero-turn maneuver.
Pre-operation checks and safety requirements.
Step-by-step guide to starting the mower engine.
Procedures for operating the mower after the engine starts.
Steps to safely shut down the mower engine.
Specific safety and operational advice for slopes.
Best practices and advice for effective mowing.
Instructions for manually moving the mower.
List of checks to be performed at various intervals.
Cleaning procedures for different parts of the mower.
Refers to 300-hour service.
Further checks for components like throttle cable and deck.
Procedures for changing fluids and filters.
Indicates tasks for 300-hour service.
How to use jumper cables to start the mower.
Steps for cleaning battery and terminals.
Instructions for installing a new mower battery.
Inspection and adjustment of the park brake.
Recommended tire pressure for optimal performance.
Steps for removing and installing caster wheels.
Checking and replacing V-belts.
Procedure for removing the mower deck belt.
Procedure for installing the mower deck belt.
Steps to level the mower deck for even cutting.
Instructions for replacing mower blades.
General cleaning procedures for the mower deck and components.
General lubrication advice and precautions.
Information on transmission maintenance.
Steps for changing the engine oil and filter.
Lubrication points for wheels and deck spindles.
Lubrication of front wheel bearings and mount.
Lubrication of deck spindle bearings.
Common causes and solutions for engine starting issues.
Issues related to the starter motor not engaging.
Diagnosing and fixing engine running problems.
Troubleshooting a mower with reduced power.
Causes and solutions for mower vibration.
Reasons for engine overheating and how to fix it.
Diagnosing why the battery is not charging.
Troubleshooting for slow or erratic mower movement.
Issues with the mower deck not engaging.
Identifying and addressing transaxle oil leaks.
Causes and solutions for uneven grass cutting.
Procedures for preparing the mower for long-term storage.
Information on ordering parts and annual service.
Explains the different positions of the ignition key switch.
Details about the mower's engine specifications.
Specifications for the mower's transmission system.
Dimensions and features of the mower's frame.
Physical measurements of the mower.
Recommended torque values for various fasteners.
General torque guidelines for hex head cap screws.
Torque values for U.S. standard hardware.
Torque values for metric standard hardware.
Checklist for initial delivery service and customer information.
Maintenance tasks to be performed after 10 hours of operation.
Routine daily maintenance checks.
Maintenance tasks required at 25-hour intervals.
Maintenance tasks required at 50-hour intervals.
Maintenance tasks required at 100-hour intervals.
Maintenance tasks required at 300-hour intervals.
Annual maintenance tasks.
