INTRODUCTION –
The HS and HD models have been
designed to give maximum performance
with minimum energy consumption. They
have the versatility in product temperature
range to be used for storage at sub zero to
dipping at desired above zero tempera-
tures. All cabinets are UL and UL sanita-
tion listed.
INSPECTION
–
Upon receipt of the cabinet, care-
fully examine the crating for damage. If
damage is found make a note on the deliv-
ery ticket before signing. Carefully remove
shipping crate and examine cabinet for
“concealed” damage. If damage is found
contact the delivering carrier immediately
and have his agent prepare an inspection
report for the purpose of filing a claim
THIS IS YOUR RESPO NSIBILITY.
SPECIFICATIONS
–
BASE
–
The cabinet base is an all welded as-
sembly of very heavy gauge steel to estab-
lish a strong foundation on which the rest
of the cabinet is built.
EXTERIOR SHELL
–
The shell is formed from heavy
gauge steel and is welded together as an as-
sembly and then welded to the cabinet base
assembly to give complete strength and du-
rability. This assembly is processed
through a chemical treatment and painted
with an enamel powder paint for a lasting
finish.
INTERIOR LINER
–
The liner is an all we lded steel ass em-
bly. Copper evaporator tubing is fastened
to the exterior of the liner; and maximum
heat transfer is further enhanced with the
addition of a conductive material on both
top and bottom of the tubing. The liner is
also chemical treated and painted with an
enamel powder paint for a lasting finish.
SUB-TOP
–
The sub-top is an all welded heavy
gauge galvanized assembly with integral
molded plastic breakers. The sub top ties
the shell and liner assemblies together and
s erves as a back up for the main top to pre-
vent denting.
INSULATION
–
The shell, liner and sub top assem-
blies are foamed in place with a polyure-
thane insulation providing outstanding insu-
lating qualities and s olid unitized construc-
tion.
MAINTOP
–
The main top is a one piece design of
heavy gauge 18-8 rust proof s tainless steel.
It has a brush satin finish to minimize
scratching and maintain a lasting clean ap-
pearance.
3
To Next Page
Loading...