Hussmann 10HD - Condensing Unit Cabinet Dimensions, Electrical, and Capacity

CONDENSING UNIT –
All models incorporate a slide-out
condensing unit for eas y access to all com-
ponents. All have a bare tube condenser
design to minimize field maintenance.
CABINET DIMENSIONS, ELECTRICAL DATA, CABINET CAPACITIES
OUTSIDE INSIDE
Cabinet Length Width Height Length Width Height
Overall Deep End
2-HS 30 1/2 19 7/16 32 1/2 26 3/8 15 5/16 25 5/8
4-HD 30 1/2 30 1/2 32 1/2 26 3/8 26 3/8 25 5/8
6-HD 43 30 1/2 32 1/2 38 7/8 26 3/8 25 5/8
8-HD 54 1/16 30 1/2 32 1/2 49 15/16 26 3/8 25 5/8
10-HD 66 9/16 30 1/2 32 1/2 62 7/16 26 3/8 25 5/8
8-HDF 54 1/16 30 1/2 32 1/2* 49 15/16 26 3/8 25 5/8
* Add 8” to top for syrup rail
ELECTRICAL CAPACITY
Volts Run Breaker Ship Cubic 2 1/2 3 # of
Amps Size Wt. Feet gal. gal. Lids
115 3.4 15 amp 188 4.5 4 4 1-S
115 3.5 15 amp 238 7.8 13 8 1-D
115 6.0 15 amp 307 12.7 21 14 1-S, 1-D
115 7.8 15 amp 355 17.0 33 21 2-D
115 7.6 15 amp 419 21.9 41 29 2-D, 1-S
115 7.8 15 amp 386 17.0 33 21 2-S
D=Double Lids S=Single Lids
The step end of each HD is the same height and length with both being 13 3/4.
Check the unit serial plate location in the condensing unit compartment for the type of
refrigerant used. The charges are listed below for the respective refrigerants.
R-12 R404A
HS-2 15 13
HD-4 16 14
HD-6 17 16
HD-8/ HDF-8 16 16
HD-10 23 23
4